Well, I'm building another B20B, however this particular one is from an automatic CR-V. Which didn't come with a PCV box... (PCV valve goes down into some sort of catch tank behind the block under the intake manifold)

I've never put an engine like this together and I'm lost on what to do. I can make something work but it's too much of a hassle for the out come.

Should I just put a catch can/breather setup from the rocker cover?

Any suggestions would be insanely great.


(If it's okay to just put it together I can finally sell an old LS-VTEC I have with the same problem!!!)