Honda Prelude Forum banner
1 - 5 of 5 Posts

·
Toki wo Kizamu Uta
Joined
·
1,225 Posts
Discussion Starter · #1 ·
I've tried to break these bolts loose with no result.

-2 x200lbs guys with a breaker bar
-7k ft/lbs air gun
-soaked with WD40

I'm almost at my point, if I can't get these off I'm just gonna cut em' and buy some brand new....but $20 each is hurtin'

Any other suggestions?
 

·
Registered
Joined
·
175 Posts
I've tried to break these bolts loose with no result.

-2 x200lbs guys with a breaker bar
-7k ft/lbs air gun
-soaked with WD40

I'm almost at my point, if I can't get these off I'm just gonna cut em' and buy some brand new....but $20 each is hurtin'

Any other suggestions?
You mean where the LCA meets up with the knuckle? If so there are marks for you to hit with a big hammer on the knuckle right around the lower ball joint. Those never come out without beating the hell outta them with a big hammer first
 
1 - 5 of 5 Posts
Top