Honda Prelude Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
586 Posts
Discussion Starter #1
I have a 14g or 14b turbo in my garage with no manifold...
LSD is having a sale on their manifolds however they are flanged for a t25.
Is it a physical impossibility to mount a 14g onto that flange? Or can i drill the holes out a bit if the ports match up?

Also the turbo i have is internally wastegated... is it possible to use an external wastegate with it? Meaning is there a way to disable the internal to run an external?

Thanks in advance guys!
Danny
 

·
Registered
Joined
·
435 Posts
to disable the internal wastegate. just disconnect the actuator and weld the flapper closed...

or you could just weld a plate over the external wastegate port on the manifold, and use the internal gate in the turbo.

i have no idea about the flanges... so can't help you there...
 

·
Registered
Joined
·
3,211 Posts
14b and T25 have the same flange type
 
1 - 7 of 7 Posts
Top