Honda Prelude Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey guys so I have an 01 honda prelude with the f20b blue top swap, rywire conversion for the distributor and sensors. It has an s200 hondata ecu and boosted at 10 lbs with a precision turbo.
So my problem is I just had it shipped to South Carolina and I got to drive it for about 2 days until it broke down.
It was driving just fine and it just shut off and would not start. It has power to the starter and tries really hard to start but there's no spark.
I checked the fuses and only 1 was popped the ACG-S 10 amp, replaced it and the car started and ran for a second then popped the fuse and shut off I replaced it again and now the car doesn't start, there is no spark and I'm bummed out.
Only codes it's throwing are ABS codes 16 and 81. (sensor and cpu)
I replaced the main relay, nothing. Ordered a new TD94u distributor and it should get here later this week besides that I'm all out of ideas.:baa:
 

·
Registered
Joined
·
324 Posts
This is a pretty weak how-to. I didn't learn anything from it.
 
1 - 2 of 2 Posts
Top