Honda Prelude Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter #1
Dear All,

Everyone knows that 88-89 and 90-91 taillights are swappable provided you have the full rear end components.

Have anyone did this before? An INX full rear conversion to an 88 prelude.
Just noticed that there is a chrome metal between the taillights and the bumper itself. Is the bumper the same as on the 91s??

Would that affect the height of the bumper thus touching the taillights.

I'm just curios as I've got a good deal of and INX rear ends (bumper/taillight and trunk lid)

http://www.jdmconnection.ca/images/68,3.jpg
 

·
Registered
Joined
·
162 Posts
whats the difference btween inx and 90-91 tails ... ummm nothing except the price ..
 

·
Registered
Joined
·
1,737 Posts
If you have the full conversion it shouldn't be a problem expect for havin to redrill new holes for the lights and wiring. other then that is shouldn't be a problem for you. now your gone have to get chrome stripping all around your lude to make it look JDM and look like the rear end of your car.
 

·
Registered
Joined
·
66 Posts
Discussion Starter #10
Here comes the real problem... The taillights were 91, only the bumper is INX. Hopefully it will fit. Will let you guys know over the weekend.

Fyi, ths chrome plate, is roughly half an inch.
 

·
Registered
Joined
·
66 Posts
Discussion Starter #12
YES... you're right Danny, just found out that they are 91 tail lights and trunk lid. Only the reear bumper is INX....
 
1 - 16 of 16 Posts
Top