[Preluding]

for those who have taken off the front bumper or fenders.

the bolt that the front bumper slider mounts on... very unique looking.

has a phillips head on the top. Mine was rusted and broke when I took it out to get the fenders off....

According to Honda... it doesn't exist.

According to www.hondaautomotiveparts.com it doesn't exist...

where do I find this missing link???

 

[OMega]

Part 52 or 54 &64
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Prelude&catcgry2=1989&catcgry3=2DR+2.0SI&catcgry4=KL5MT&catcgry5=BUMPER

 

[Preluding]

^ thats the bolt that holds the bumper skin to the bumper no??

 

[LudaPower]

Yeah it is..
It's not anywhere on the site that I can tell. Figured it'd be in the bulkhead section but no. Your best bet is junkyard or forsale forum.

 

[rudeludenotmeanthough]

lets try this out...

which number? 77; in the middle..

71193-SF1-J00 BOLT, BUMPER CORNER
i havet taken the bumper off in days.

 

[LudaPower]

No i think it's part of the fender or bulkhead. It has a really flathead top.. like 1/8th" thick i think... but about 3/4" in diameter.

 

[LudaPower]

No i think it's part of the fender or bulkhead. It has a really flathead top.. like 1/8th" thick i think... but about 3/4" in diameter.

 

[rudeludenotmeanthough]

yea.. i rember the part now.. it uses a #3 philips..

i think its 77... ill grab the bulkhead pic

nope... not there... im pretty sure its 77 in teh pic above.

 

[Preluding]

77 seems like a pretty good bet!

but it looks like it goes into 33.... whats 33?? if it a piece of fender thats cut... thats great!

 

[LudaPower]

No that's obviously just a bolt and has nothing to do with it. It looks like #19 in the bulkhead pic (the part the bolt is screwed into) but i can't tell for sure since i have no clue what that is without details.

 

[Preluding]

Everything inside sais it should be in this...

it connects to 2/5 and goes into the hole beside bolt 16 on the front of the fender (you can even see the whole in the fender where it SHOULD go)

 

[LudaPower]

Yeah I looked at that also.. but looking at pics from my lude and that pic.. my fender isn't the same as that one.. not at all the same shape.. don't know why though.

 

[88SE Lude]

Sahme this didn't come up a day ago, I had my 'fender' off and could have too ka pic.

I think I know which part you mean though. My 'fender' doesn't look like that either. No bracket on the bottom of the front part. (IYSWIM)

Are you looking for the large head fixing with the pozi cross in it?
The plastic slider of the fender goes onto it.

 

[dutchlude3gen]

do you mean the mushroom like bold? that is on the fender?

 

[Daily Interlude]

YOu talking about the screw thing on the car that the clip slides onto (no's 30 and 31 are the clip that mounts to the bumper skin)?

I think that's attached to a bracket (like part of it). I don't see it in either of the pics on this thread so far. I'll have to have a pic with the bumper off to identify it better.

Anyone have one?

 

[Preluding]

I'll get one... !

and everybody on here knows exactly what screw it is....

its just not in any honda manual...

 

[team123luder]

This is why I love this site..... Yeah the screws on my sliding bracket thing are screwed lol./.. used the wrong drive to pull em out.

 

[Preluding]

I'll get the part numbers/prices and post them too while I'm at it!

 

[Preluding]

PICTURES.... its the bolt on the LEFT hand side... the slider assembly is on the right. sorry, bad pics...