Honda Prelude Forum banner

H22A swap progress

8K views 38 replies 23 participants last post by  Rollthelosingdice 
#1 · (Edited by Moderator)
to big to load.. click the links

Mounts, 12LBS fly wheel. Clutch.
http://www3.telus.net/public/htang01/DSC00268.JPG
B20 OUT :D
http://www3.telus.net/public/htang01/DSC00313.JPG
http://www3.telus.net/public/htang01/DSC00314.JPG
http://www3.telus.net/public/htang01/DSC00316.JPG
H22A OBD1 w/LSD tranny (M2B4)
http://www3.telus.net/public/htang01/DSC00319.JPG
P13 W/ Vtec Frog OBO0>OBD1 conversion harness
http://www3.telus.net/public/htang01/DSC00322.JPG
Had my Valve Cover powerder coated. Stil need to file down the letters to get the Silver back.
http://www3.telus.net/public/htang01/DSC00355.JPG
All seals and timing components changed and ready to go
http://www3.telus.net/public/htang01/DSC00348.JPG
http://www3.telus.net/public/htang01/DSC00369.JPG
here we go, Lining the Mounts was a Bitch and a half. rear was easy, other 2 sucked big time!
http://www3.telus.net/public/htang01/DSC00371.JPG
http://www3.telus.net/public/htang01/DSC00374.JPG
After an hour of work, victory was mine. I must say I had a little victory dance when it was finally bolted down :p
http://www3.telus.net/public/htang01/DSC00378.JPG
http://www3.telus.net/public/htang01/DSC00379.JPG

Couple more days and I should be finished :D waiting on accord axles.
I must say this swap was no where near as hard as i thought. and i'm glad i had the advantage of a hoist :D. more pics to come of what my ideas are for the skid plate and what not. I also chose to keep PS as this was my daily driver and I wanted to keep the drive comfort there. Pics to come for everything. all in time :)
 
See less See more
#33 ·
I am doing my swap soon and I have a few questions if you could message me or respond on the post I am just wondering about the old innovative mounts I have them and I was told I would need to shave some frame for clearance for crank pulley? Does anyone have any idea about this?
 
#34 · (Edited)
Throw those mounts away, they are trash.

My H22 kit is what you want, I was contracted to fix the innovative H22 swap kit and even after we fixed it, you still could not run powersteerng or AC due too the poor design.

Automotive tire Motor vehicle Tread Rim Synthetic rubber


Wheel Automotive tire Tire Motor vehicle Tread


Automotive tire Water Asphalt Road surface Motor vehicle




This is the current innovative kit. And I sold my kit too a customer who owned this.
He practically gave away his old kit.

Do not think you can fix this kit, it needs to be redesigned and the only way to avoid the issues your seeing here is basically get my kit the original 2nd gen H22 kit - AZ Race/ Now 1FunRyd Performance swap kit - www.1funryd.com


Here is my kit:

Wood Tool Auto part Hardwood Carmine
 

Attachments

#38 ·
Like I said, it was modified already to make his H22 swap work.
The new owner who eventually purchased my kit realized that the innovative ones were still way off.
He inherited the chopped up the chassis so unless he has some body work done to it, that is still there.

My kit does not cost $700, unless you are trying to swap to the B-Series then yes it does cost that much.
But I hope you do not think that innovative makes a B-Series swap kit for our chassis because they do not.

By the time you fix your innovative kit, you will spend either the same or even more as purchasing my swap kit in order to fix that kit.
You have been dually warned.

The choice is yours.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top