Honda Prelude Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
526 Posts
Discussion Starter #1
So i've started a head build and today I took the valves out. I didn't have a valve tool so I did it the old fashion way. By doing this the valve locks went everywhere. So I got out a magnet and started collecting them.

So the curiousness happened when I ran the magnet over the valve. the magnet only sticks to part of the valve like half way up the shaft of the valve.

I was wondering why the valve is only partially steel?
 
1 - 1 of 1 Posts
Top