Autopower Race Roll Bar w/ welded diagonal crossbrace and welded harness bar.
Powdercoated gloss black. It is used and has scratches and flaws here and there, but mostly in places that you will not see at all when it is installed in a car with interior and two seats. Comes with base plates. Goes for about $700 brand new, I'm asking $500. Local pickup here in southern CA only, I will not ship this. (I can also include my black rear interior panels that I had that are were cut to have the roll bar go through for an additional amount)
Also FOR SALE:
Black carpet purchased brand new from Vintage Honda. The list on this was over $700 and I have been told is entirely discontinued now. There are holes in it from where the 3 bolts went to mount the Autopower roll bar, but if you don't use the roll bar they will be covered by your floor mats. I'm asking $500 for this.
I can ship the carpet. I presume the box would be kinda big, though, so shipping may be a bit much even though it isn't all that heavy.
Local pickup in southern CA and cash preferred, but Paypal can be taken.
94 Vtec Restoration/Upgraded Daily
I have 2 4th gens. The one in this thread is to keep OEM as possible and add some flair to it. I have a 95 Helms and fair amount of tools. I have read a few threads about this certain build and lack most of the items necessary to make a complete...
H22 All-motor build (non-Prelude...)
June 2020 UPDATE - Engine is back from machine shops, but the block is going back soon for more work (it's my first build; I assumed some things were basic enough to be automatic service, when they weren't). Car also needs a manual transmission conversion...
Well back in 2015 I had a black 1988 4ws. It was damn near perfect and I was building it just right, getting everything done the right way and BAM! Me and my beautiful got pregnant with twins so I unfortunately had to sell it. Now a few years later and I’ve finally got another prelude and I’m...
Ladies and Gentlemen,
Welcome to my build page. I was collecting parts for this build since I got the car (4 - 5 years now), my biggest problems not to start earlier was TIME and SPACE. Finally I got the garage, so let's start.
There she is, pretty much in the same condition as I picked...
Hizzlehonda's 1990 Si
Here are some pics of the B21 coming out....
As you can see the #2 Cylinder was experiencing some piston slap due to the bad rod bearing. Luckily it didnt start to scratch the cylinder walls, it looks worse than it is which is a relief.