Honda Prelude Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey guys I have a 97 prelude base h22a4 auto all stock never had work on it and I bent the valves and have scorched pistons, lucky me right? I'm planning on swapping the motor to a JDM h22a and was wondering what all I need to do besides pull the motel and put the other one in. My original plan was to rebuild it bUT I moved to ND 2 1/2 years a go and nobody in the state will even touch the sleeves so my cars been sitting since thanksgiving.
Do I need to get a different ECU?
-is so do I need to get it tuned?
Can I use the same motor mounts?
If the new motor comes with everything do I need to swap anything from the onld motor to the other?
What are general difficulties that come with the swap?

Thank you to any and everyone who can help
 

·
Administrator
Joined
·
6,802 Posts
I'm normally more easy going when it comes to these threads....but you have clearly made no attempt in finding any information yourself. Otherwise you would know you need to swap all sensors, distributor, oil pump and upper portion of the intake manifold. If remaining obd2.

If not obd2, we'll I've given more than enough to start you off.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top