Honda Prelude Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
I searched and found lots of info on the 90 amp alt. And heard people talking about the 160 amp alt. But couldn't get an actual answer if the 160 worked or not. Im assuming it will....because its for the 2.2L. But was hoping for a positive answer. Thanks!
 

·
Registered
Joined
·
1,216 Posts
Um, no. Components will only draw as much current as they need. And fuses are there to protect components should they ever start to draw more than their safe limit. This is most likely for a high-power ICE system, with its own power regulation unit.
 

·
* * * * * *
Joined
·
12,918 Posts
alanoneil said:
Um, no. Components will only draw as much current as they need. And fuses are there to protect components should they ever start to draw more than their safe limit. This is most likely for a high-power ICE system, with its own power regulation unit.
I know it was a joke :tongue2: :turn:
 

·
Registered
Joined
·
3,940 Posts
My 160 amp alt has been workjing for almost 2 months...no problem.
 

·
Registered
Joined
·
1,188 Posts
hmmmmmmmm, time for more hydrogen generators... WEE!!!
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top