I have a '95 BB2 prelude SE with an h23a3. I've learned that this is an Euro only motor. This is consistent with the minimal information I've gotten from the previous owner who unfortunately couldn't tell me the mileage at which the swap was done nor could he produce any documention for the swap...
Good evening everyone,
My fiance has his Prelude swapped from a H23a2 to a H22a JDM. But we have the problem that it wont start. The engine is stock, H22 and the engine bay and everything inclusing cables is H23. We used a H22 tree and mixed it with the H23 to see if it works. The ECU is also...
not much of a tuner car guy, but I have a 95 prelude the front cam seized up, found someone on line selling a B20b engine and want to know if it would be a straight swap: i.e will trans and flywheel match up, etc. any help would be appreciated. thanks
I've got a problem with my prelude.
The e-brake light and "brake lamp" stays on.
oil level is ok, rear brake lights are also okay.
Oil level sensor works, no water in the rear lights.
contact from the e brakes works fine already checked.
Does someone has any idea?
I need some help, I'm really calling on the community here.
I have a 92 Honda Prelude, OBD1, H23a1. Being that I’m on a budget it will be awhile before I get my JDM H22 to swap. In the meantime, I am wanting to trim the bay and add an aftermarket harness for a cleaner look. The issue I’m having...