Honda Prelude Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
5,342 Posts
Discussion Starter #1
you know the one thing i cant never find on here but if i do is the specs on pp.com. im frustrated of looking for them all sacttered around.
mods can we sticky this as 2g specs i see to much ?S and answers that could be elimanted if they were stickyed.
can soemone post the 2g specs
heres wat should be posted up someone that has a book handy or knowlwdge post them up i only have wat i think are the specs . plz ffill in acurate specs

usdm model
si:
length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
wheel size
fuel capacity

dx model:

length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
wheel size
fuel capacity

jdm si:

length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
wheel size
fuel capactiy

xx model:

length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
wheel size
fuel capacty

edm si :

length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
fuel capacity
wheel size

edm xx:
length
width
hight
weight
hp
corner weight
hp to weight ratio
motor
mpg
transmisson gear ratio
manual /automatic
wheel size
fuel capacity
 

·
Registered
Joined
·
1,809 Posts
Here's what little I know.....
-- DX --
Fuel capacity -- 15.5 gal
Tire size -- 185/70 R13
HP -- I've seen 2 ratings. The more common one was 100hp, the other was 110hp. (Both for the A18A1 of course)
Motor -- A18A1 (1987), ET2 (pre-1987, for '87 the ET was renamed A18)
MPG -- Not sure what the factory ratings are, but mine got 36 city, 42 hwy before retuning the carbs for power and removing all the emissions crap (i.e. black box of death and spaghetti vacuum lines).
 

·
Registered
Joined
·
5,342 Posts
Discussion Starter #3
thnx for contributiing also i fogot to add put wat motor came in each model
 

·
Registered
Joined
·
66 Posts
usdm model:
Base Si
length 169.1 in 172
width 66.9 66.9
height 48.6 48.6
weight 2293 lbs 2379
hp [email protected] [email protected]
corner weight huh?
hp to weight ratio do the math
motor 1829cc 1955cc
mpg 24/32(5sp) 23/30 (auto) 25/30(5sp) 23/29(auto)
transmisson gear ratio 3.18/1.94/1.25/.93/.76 3.18/1.84/1.25/.94/.77
wheel size 185/70R13 same
fuel capacity 15.8 gallons same

Most numbers are per the brochure. Some others (gear ratios) are from Car and Driver magazine.

Enjoy.
 

·
Registered
Joined
·
5,342 Posts
Discussion Starter #5
any body wat to contribute
 

·
Aussie Aussie Aussie
Joined
·
1,697 Posts
Specs

I stumbled across this link and it has info on all our engines and a whole bunch more honda engines. Gives great clarity about what came out where and especially about the B20's which the USDM didn't get. Anyway, i didn't want to blatantly paste it all in because I don't have the time/patients and I didn't wanna mess up JDM86lude's format...

Here it is chaps!

http://www.caralem.com/forum/showthread.php?t=9539

Enjoy!
 

·
Registered
Joined
·
754 Posts
I stumbled across this link and it has info on all our engines and a whole bunch more honda engines. Gives great clarity about what came out where and especially about the B20's which the USDM didn't get. Anyway, i didn't want to blatantly paste it all in because I don't have the time/patients and I didn't wanna mess up JDM86lude's format...

Here it is chaps!

http://www.caralem.com/forum/showthread.php?t=9539

Enjoy!
wow thats a cool site
 

·
Registered
Joined
·
5,342 Posts
Discussion Starter #8
yea thnx man thats so kool im really jsut lookin for the jdm specs
 
1 - 8 of 8 Posts
Top