Honda Prelude Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 59 Results
  1. 5th Gen
    I had the opportunity to interview my homie and film/shoot his 1998 Turbocharged Honda Prelude. Fully built h23a and built LSD trans. This thing is a monster! If you enjoy the video, please like and subscribe! Stay ludin'!
  2. Forced Induction
    No this is not another post just asking "wuh do uh neede to turbo muh stock h22?" or "how much Psi can a stock motor take?". I have already used the search bar and spent several hours on this site and many others and have answered most of my questions, I would like some help weighing out my...
  3. 3rd Gen
    Alright 3rd genners. Ive scoured these forums and other honda forums for weeks trying to learn about these things. "They're super complex and finicky dont mess with them" "they're just motorcycle carbs lol" pick one. Ive went through the manual diagram of the carbs and they look fairly similar...
  4. General
    What are some good first upgrades to do to an H22a4. First time owning one and still learning about them. want to do simple upgrades over the summer then pull the engine and do a full turbo build. Aiming to eventually be around 550whp. What upgrades do you recommend to start with to at least...
  5. General
    Any turbo kits that are good and on the cheaper side for the 5th gen. and also can’t seem to find any ecu’s for the prelude
  6. 3rd Gen
    I just got my turbo 3rd gen running Android driving. When I am under boost the dash mounted bost gauge reads 10psi. While the hondata records 1.1 psi from the map. Has anyone had a similar issue?
  7. 5th Gen
    Hey guys!! New to the group, just joined in. I have just discovered this group and i have read alot of articles from you guys and i love this community very much already! Here are a few photos of how she looked a year ago when I bought it from NL And here is how she looks now! She is my...
  8. 5th Gen
    Hello! I have a 1999 Honda Prelude base model with the 2.2 liter H22 a4. I have the automatic transmission. I would very much like to put a turbo in my car, but I need to know how much torque the stock transmission* can handle if it’s built. I already know there’s more to it than that, I just...
  9. 3rd Gen
    hey guys, so i blew the head gasket on my lude a few years ago now. funds are finally in the right place, so im looking to rebuild the engine. seeing as im already going through to the head of the engine, i figured id just do the whole thing and start fresh. I'm wondering if anyone has a few...
  10. Builds
    Hello everyone new to prelude power I’ve been a prelude lover since I was younger now I own a beautiful 92 silver full built turbo lude that I call the prelube lol the current set up is h22a the car made 427 whp 365 wheel torque on 20 pounds it’s all good parts besides the manifold but it did...
  11. Forced Induction
    Hey, new here. Im updating my stock map sensor to a 3 Bar Speedfactory Map sensor and cant find the Scalar and Offset values. Can anyone direct me to the values? Here is the link to the sensor. https://jhpusa.com/products/speedfactory-3bar-map-sensor-d-b-f-h-series Thanks
  12. 4th Gen
    i'm looking to sell my 4th gen prelude, it's a 1993 with a JDM H22a and the bottom end of the motor has been built with mahle pistons and eagle rods, and has a GT3582r turbo on it, also running 780cc injectors, i have also put new wheel bearings and brakes on the front and back, and have done...
  13. 4th Gen
    I have a 92 prelude S and I absolutely love the car, except it's obvious that the engine is getting a little tired. By the end of the summer I want to either rebuild it or replace it. My end goal for the car is to throw a turbo on it, since I absolutely love the prelude platform and would swap...
  14. 5th Gen
    I've looked and looked and can't find a decent rotrex SC build involving a h22. I'm in the procces of making a bracket to place the SC in the alternator's spot and then the alternator in the A/C's spot. My question is, can I have decent boost with the Rotex SC? i.e 8 psi. I'm a stock H22...
  15. Introduction
    First off I'm Chris I'm living here in Hawaii So parts are harrrrrrd to get at reasonable price I have owned 45 Hondas...yes seriously 45 So I'm not new to the honda game but this is my first prelude... 1992 Rhd Prelude imported not converted H22a Skunk2 Intake Manifold Skunk2 72mm...
  16. 3rd Gen
    Hey guys, I recently (finally) started work on the engine I plan to use to replace my worn out b21. I'm piecing together parts at the moment, and the block/crank/rods are at the machine shop as we speak. Basically what I want to do with this motor is overbuild it slightly, so I can have the...
  17. Introduction
    I wanted to introduce myself to the forums. I have recently purchased a green 5th gen Prelude that has been turbocharged. Anyway, I am in the Pensacola Florida area and hoping to meet some people in the area who also take an interest in these cars.
  18. 3rd Gen
    Hey PP. I just got a 3rd gen for a really good price. As I've been trying to research the engine it has I'm getting a little discouraged. It has a b20a1 and so far I've come to understand it has 137hp and no after market support. I was thinking of the best way to get more out of it and the best...
  19. 4th Gen
    i just bought my prelude and put a JDM h22a in, im looking at what turbo would be good. could someone post a few reasonably priced turbos that would be good. would a T3 T4 T04E be good? thanks!
  20. Builds
    I have a 89 2.0si i am rebuilding currently torn down i have fel pro head gasket kit, gettin the block machined for weisco 81.5 mm pistons(still need) looking into h22/f23 forged conneting rods, acl race bearings. The head will be getting rebuilt with stock valves grinded, how does this sound so...
1-20 of 59 Results
Top