Honda Prelude Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 3rd Gen
    This is a pretty structural part of the car so if the inner structure is too far gone...Use your head and know when to call it quits. Research this type of repair on 80s-90s Hondas before attempting. Link for US customers: 1988-1991 Honda Civic 2/3 Door Slip-on Rocker Panel - Right Side | Mill...
  2. 3rd Gen
    Restoring a prelude and need an engine message me if you have and can make a deal. Thank you
  3. 3rd Gen
    Greetings, on my drive home my 89' auto engine (B20A6) developed a knocking noise, however it doesnt sound like rod knock, it sounds lighter and that it could be in the top end? the engine felt fine on the drive home before i noticed the noise at a stop light and switched it off. I have...
  4. 3rd Gen
    Hello all I have been working on putting fuel injection from the original engine in my 91 prelude onto the b20a3 that was put into it. After I got both the dual carb setup and the fuel injection taken off I realized that the fuel injection manifold has 4 pipes and the engine only has two pipes...
  5. 3rd Gen
    Hey everyone, my 88 manual third gen kinda bunny hops when going slow in first gear. I change it to second gear and it's fine but if I don't pick up speed it does the same thing. The car starts to jerk forward as if it is about to stall... I also have this really horrible smell of...
  6. 3rd Gen
    Ok, im a new luder. My baby is stock right now. Shes an 89 si 5speed and i need to lower it a little. What is the difference in getting coilovers vs. Springs and struts??
1-6 of 6 Results
Top