Honda Prelude Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 5th Gen
    So my H22A swap was running perfect I had no issues I was driving it fine I noticed I had a leak at the thermostat housing fixed the leak and swapped the thermostat while I was at it but now cut to a week later I have burped this car every day and I’m still getting air bubbles and the idle is...
  2. 3rd Gen
    Hi I have a 89 si and the first time I got this code I drove to a friend's in the morning with everything good (about 6 minute drive, temp about freezing). We took his truck skiing, then after we got back to his house I fired up the lude and got check engine light + sounding not so good, drove...
  3. 2nd Gen
    I'm trying to change out my thermostat on my '86 lude, and I have run into my first little glitch. Should be super easy... To replace the thermostat the Haynes manual says I need to drain the coolant. Cool, no problem. But step 5 under draining the coolant says this: "After the coolant stops...
  4. 4th Gen
    I have a 92 prelude Si and my engine temp wont read, ive replaced units and plugs and all this stuff and im done with it so im just gonna buy a temp gauge, but i dont know how to install it. Any tips from someone who knows how to do it!? thanks guys vic
  5. 4th Gen
    My H22A has the sensor on the front water neck. I have noticed that the 5th gens don't have this sensor. I do not want this sensor like the 5th gens, so what exactly is different? Is that sensor located somewhere else on the 5th gens? What will I have to do exactly to get it to work? The motor...
  6. 4th Gen
    Perfect timing too...Winter is here. Need to replace. Never done it on this car. What else do I get with it? I think 1 gasket and is that it from what the repair manual? Do I have to remove the whole assembly or just the cover to slide out? Does a lot of coolant drain out if I change it...
1-6 of 6 Results
Top