Honda Prelude Forum banner
slave cylinder

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 5th Gen
    Alright so i uploaded some photos for help. But i’m hooking up my slave cylinder with a hydraulic clutch line to the master cylinder, and i disconnected the original line from the slave going directly to the transmission. i was going to plug the hole going into the transmission where the line...
  2. 4th Gen
    Hello, I have a 1996 Honda Prelude VTEC model. I bought this car in a no running condition but I got it to run after changing the main relay. The clutch was sticking to the floor and so I changed the slave cylinder because there was a new one in the car, still in the box. The old one was stuck...
  3. 5th Gen
    I've searched, and read a few descriptions and videos of the process. But as I'm sure you know each situation is a little different. I did read Fallacy's write up already, and tried that method and got nada regarding a correctly functioning clutch. That is why I wrote this post. Anyway, so...
  4. 5th Gen
    Disclaimer: You do this on your own. I'm not responsible if anything happens under your watch, including but not limited to: spontaneous combustion of objects, improper use of tools, breaking of parts or self, blood loss, hair loss, or rule #32. I will attempt to snap some pictures and insert...
1-4 of 4 Results