Honda Prelude Forum banner
rubbing
1-5 of 5 Results
  1. 5th Gen
    Hey guys wanted to know if I will be able to fit 18x9.5 on the front and 18.10.5 on rears on the 98 prelude both with a 22 offset. I will be rolling my fenders and what tire size you recommend I kind of want a bit of stretch. Thanks for the help.
  2. 5th Gen
    I just got my new wheels with mounted tires. They are 18x8.5 +35 offset. I have 245/40/18 tires on them. I am on stock suspension right now and can drive with no rubbing but the rears rub under hard acceleration or moderate bumps. Im trying to decide if I can get away with stiffer springs, or...
  3. 5th Gen
    So i have a 99 SH, she is lowered approx. 1.3-2 inches on an eibach pro-kit and here is the problem i am running in to. I took my car to a local shop to get new rotors, calipers, pads and new tires (205/50/16R) on stock wheels, same size tire as before. While checking the brakes I guess they saw...
  4. 5th Gen
    Hey ya'll, So I was due to change my brake fluid and I also wanted to repaint my calipers, so I took all of my brakes off the car. After getting them back on and adjusted properly, I got my girlfriend to help bleed them (yeah, that's right :p). That all went fine, got plenty of air bubbles...
  5. 3rd Gen
    i already searched but didnt find the specfic info i needed... my prelude originaly had 205/40/16 tires on the front and 205/45/16 on the rear. i installed 2" drop springs for an integra, on my 88 prelude....bad idea. After i installed the front springs, the tiny front tires were tucked. It...
1-5 of 5 Results
Top