Honda Prelude Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. 3rd Gen
    Hello All, I picked up my Prelude a while back as a weekend car and am finally getting around to working on it. To start, my mechanic let me know he wants to replace the valve cover gasket, distributor cap/rotor, and spark plug wires. My question – this car has the B20A4 engine (dual carb, non...
  2. General
    Hi guys, I'm Trixie! Does anyone have any tips on an auto shop in the DC/ MD/ VA area that specializes in older Hondas? I have a Check Engine Light issue, and I've taken it to two different auto shops, and they can't seem to figure out how to fix the issue because my 2000 Prelude is an older car...
  3. 3rd Gen
    Hey fellow luders. I've recently repaired the water pump inlet pipe on my Prelude and thought I'd share what I've learnt. This diagram shows the part in question for those who are unfamiliar. My pipe was fairly corroded all over, but what was causing the most trouble was the end that fits into...
  4. NorthEast
    Hi! I've had a 1991 Honda Prelude for some time now. I bought it several years ago to learn how to drive manual. I love the old car too much to sell it. The only repairs my dad and I have done have been necessary ones to keep it driving as things become an issue. In a perfect world, it would be...
  5. California
    Hey guys, I have a 89 prelude with some leaks and bad hoses that needs some fixing. Im not very experienced and lack the money backing to take it to a shop that'll charge me 1000's of dollars. A) the extent of the problems I need solving is 1a.power steering leak: the leak from what I can...
  6. 5th Gen
    So my driver's side window isn't working properly in my 99. It goes down but doesn't go up properly. It's a pita where like it'll go about halfway up, get stuck, and then I have to combine a mixture of slamming the door and putting it slightly down then back up and using the switch again and...
  7. 2nd Gen
    Hi, I know my car has rust on it, but where are the main hotspots for rust on 83 Ludes? The weather is typically Tasmanian and my town is considered a beach holiday town. So where are the main places where rust usually congrigates in these conditions?
  8. SouthEast
    A lot of you guys know me from this forum, some of you know me in person and if you been watching my build thread you know that I've been experiencing really tough time with mechanics, who was working on my car before. For those who don't know - basically my car been moving from shop to shop for...
  9. 5th Gen
    I have a 97 lude with atts and about 3 weeks ago I lost control on some black ice (Cleveland oh) needless to say I ended up replacing some power steering lines and the driver side cv axle. Now for the problem with the ATTS, where the cv axle connects to the ATTS it seems like the bearing inside...
  10. 3rd Gen
    A constant problem for many IF not all. The VSS for our 3rd gens is either hard to obtain due to $ or pure inavailibility to find a 3rdG in a local Junkyard. This write up is to obtain a possible "cheap fix"(supplies cost me under 20$) KEEP IN MIND THIS IS NOT 100% I had 2 VSS, my stock one and...
  11. 3rd Gen
    Alright guys ima tell you everything first and try to help me out before you bash on me. 1. I got into a car accident. It was a minor fender bender for me, hardly scratched the other driver's Honda pilot. I was able to get a used hood, factory white to match my paint, IN GREAT CONDITION :). My...
  12. Universal Write ups & How Tos
    Hey fellow “Luders” . Just wanted to do a write up on replacing the axles , or cv joints for any would-be do it yourselfer. I’ve done several axle changes on 3rd gen preludes. This was my first time on my 2nd gen 87 Si 5-speed. This was by far the most difficult. Seems like I ran into every...
1-13 of 14 Results
Top