Search Results for ‘led’

MY PRELUDE'S SAFETY 3 ITEMS. ・Hazard switch on + brake lamp ・Trunk lid Open ・Back https://www.facebook.com/100017370319472/videos/pcb.10150991715959996/194494511139558/?type=3&theater&ifg=1

Hey yall, I own a year 2000 prelude. My passenger side headlight went out a while ago, so i went to replace the bulb. I made sure not to touch the new bulb with my fingers, but when I installed the it and started the car, after about 10 seconds there was an audible POP. When i checked it out...

クルーズコントロールメインスイッチをus仕様に変換 クルーズコントロールメインスイッチをUS仕様に変換するため、変換ハーネスを作成しました。 日本（恐らくUK仕様、オーストラリア仕様も同じと思われます。）の後期仕様の「クルーズコントロールメインスイッチ」はUS仕様、カナダ仕様の1スイッチと異なり2スイッチを採用しています。しかもオン状態を維持するには電気的なシステムを採用していることも前期型スイッチやUS仕様との大きな違いです。ただしこれにより悪くなった点も見つかりました。...

Looking for a 5th Gen BB6 Mugen Flush Mount Spoiler with the LED brake light. If anyone have come across one of those - let me know. Thanks.

This took me a while to stumble upon. I wanted to do an LED conversion a long time ago but I didn't feel like dicking around with LED strips or making a custom PCB for the limited space behind the 5th gen cluster. This method achieves the same results as using LED strips and is much simpler...

Alrighty, So basically I'm trying to run 4, 30cm LED strips off of my cars constant 12V power supply leading to the stereo. I also want to wire a toggle switch in here so I can turn it on or off as I wish. I know very little about wiring and need some assistance. I've tried the following two...

Everyone has done a project involving LED tail lights or front turn signals, but I haven't seen one involving the front sidemarkers. I've thought about this for a while since I don't like how they look lit up with a single bulb and LED bulbs don't distribute the light properly, they also are not...

I really like the look of the white cluster: http://www.preludepower.com/forums/showthread.php?t=252863 and am thinking about doing it, but will the needle color stay red? I want to make the needle distinguishly red and the numbers white, is there anything extra i need to do, or will the...

*WARNING* Just like finding the penguin in the fridge that shuts off your light, this is dangerous and requires proper tools. For this critical task we need a jewelry box and a small LED panel. I keep all my faggotry in one of these. It also comes in handy in holding an LED panel. But...

Looking for $150 shipped for both. Climate control and gauge cluster (usdm with 136,xxx miles on it), both in great convention retrofitted with white LEDs. Pictures up tonight! Make an offer! Located in central FL local pickup welcome.

Note: all my prices include the paypal fees. Anything additional is otherwise listed. High mount tail light. Honda price is $75, I'm asking $34 + $3 shipping. ** The item above will be sent out through FedEx - which includes tracking and insurance - because it is big. Everything BELOW...

I AM CURRENTLY IN THE PROCESS OF MOVING A LOT OF MY PICTURES FROM FLICKR TO PHOTOBUCKET. THE PICTURES IN THIS THREAD WILL BE DOWN TEMPORARILY. IF THEY ARE NOT BACK UP BY NOVEMBER 1, 2012, PLEASE REMIND ME ABOUT THEM VIA PM. THANKS! This looks fantastic in person. I get lots of comments on...

LED Conversion Kit - Honda Prelude 97-01 Now available from Diode Dynamics are interior LED Conversion kits. They come in stage 1, stage 2, or stage 3 based upon brightness and cost. All of them make use of our brand new, high-quality line of LED bulbs! We guarantee our stage 3 kit will be...

So I finally decided to go ahead and do my LED retrofit for my tailights this past week. I'll let the pics do the talking first... I spent a lot of time doing research on these. I used Lumileds Superflux red/orange LEDs, they are built for automotive use and I think its the same ones that...