Hey guys, doing an H swap. I was told that with the new Rywire harness that all I need is a few things to wire on and I would be all set. I can't remember the name of it right now, but one of those was a device that, if I remember correctly, was supposed to control fuel delivery to some extent...
took my jdm 3 pin alt plug off harness and spliced a 4 wire usdm(i think) plug to harness...wire on my harness are black/yellow...blue/white...and green/white...those wires match up so i spliced those to the plug, but there is extra red/white wire hangin...what do i do with it? what do they mean...
I am in need of some wiring plugs from a 5th gen or other obd2 engine harness. If you guys have a chopped up harness laying around I need a few wires.
First I need a knock sensor plug with as much wiring attached as you can manage.
Second I need the cps(on the crank pulley) sensor plug or the...
#1 black w/ yellow stripe, all of them
#2 is every combination of striped wire i can count
#3(grey connector) white, blk w/ yellow stripe
#4(green connector) brown w/ black stripe & blue with black stripe
I don't have 100 posts. I lurk enough here for christ's sake. Could a mod please move this to the right place? I apologize for having to put it here.
I have the gauges. I need everything else. Shipped to 46184. PM's checked daily.
Thanks and my bad. Don't shoot me in the face.