Search Results for ‘h22a4’

So I bought a 2000 auto Prelude with approximately 170,000kms a couple of months ago. The dude said it had "no compression" and burnt lots of oil. I bought it and got it into my garage. I decided that I would try to rebuild the engine and get the car back to decent condition. The only problem is...

I got this 98 prelude (base model) h22a4 I t’s been manual swapped and ob1 converted but I don’t think they knew what they were doing. As in its got a p14 ecu which to my knowledge doesn’t have vtec, and it runs real rich. There’s also a bunch of plugs unpluged on the right side of the engine...

I'm going to put an h22a4 into my 91 prelude. Is there anything I need to keep an eye out for when I go look at the motor, it's just the motor no trany. I know to make sure it's not type sh. The only reason I'm posting it here because the 91 never came with the h22. Delete if not allowed here

So now that snow has (mostly) melted here in Syracuse NY, it's finally time to start work on MY VERY FIRST PROJECT CAR. Because I enjoy being in over my head, I bought this 99' Lude with a blown engine. Two neighbors with history restoring cars were enthusiastic enough to encourage me to try...

On the picture is my battery still good with those white stuff on top? Why is it? Beside it is that the starter with a leak? Lastly the engine has with stuffs scattered all over the place like white particles or something car hasnt run for a while during the winter just parked outside Thanks...

Watsup everyone ✌ Like the title says, trying to find an h22a4 bare block. Had no idea it would be so hard to find one when I bought the car, but it is what it is. Lmk if y'all wanna do business 👍 cheers guys

Hey guys. This is gonna be a journey. I have an 89 Honda prelude 4ws with a B20A05 in it. I absolutely love this car. I am going to swap in a 2001 H22A4 and was advised to document as well as enjoy sharing my progress with y'all. This is my first mechanical adventure so any advice helps.

sometimes when I start my car my idle surges until I put it in drive and I did some research and people are saying it could be the iacv or fitv and was gonna start with the fitv. I just want to know if fitv are Interchangeable between h,b and f series motors. They all look exactly the same and...

Hi Yall, so long story short, on New Years Eve my stock H22a4 blew up and melted a piston on me. She ran strong for 242,000 miles original to the car. Well some things happen for a reason, the previous summer, i actually purchased a used F20B that had a blown piston from being boosted by...

Hey y'all. I'm in a bad way. I got furloughed last week and so I've been doing some gig work around town. Problem is, now I need a water pump, and I just don't have the dough to get one... Anyone feeling particularly helpful today? I'm within walking distance of the O'reilly's at 6015 Jimmy...

So, I blew a head gasket after doing some cooling system repair and forgetting my rad cap on the driveway... Yeah stupid... So Im finished replacing it and am cleaning and putting everything back together. Specifically, the problem I'm having is that I've got the 2 camshafts back onto the...

Extreme TL:DR : Manual 5th gen Type SH. Cranks, won't start. Sat for a year. Packed with snow after sitting. New battery. Full timing job done. Ignition wires and spark plugs replaced. Good spark, compression and fuel. Can hear fuel pump prime. No check engine light or codes. Check engine light...

Ok so i know i need h22a1 injectors to match the p13 ecu for obd1, but i am unsure of which injectors exactly will work with the stock p13 ecu without running lean or rich. Ive found several injectors for sale on website, but i am not sure if they will work with the p13. I believe these are the...

Hello everyone, i have a 2001 5th gen with an H22A4 and it died in February. It wouldn't crank or start, i changed the starter, nothing happened. its an automatic so when i took off the stater i noticed that the torque converter had its welds broken and its gears grinned. Went ahead and changed...

This project build will be pretty exciting for sure! Picked up this 2000 Prelude from auction for $200. It is a Base model, H22a4, manual tranny. It was fairly stock with only a short ram intake and lowering springs put on it. Only real issue that was obvious was an oil leak. After...

I've read a lot but haven't seen this direct answer.I'm new to ludein and Hondas in general but I'm in love. so I did an accord swap first time out in the Honda world. just an f22 swap to f22 everything went well. I was getting ready to do the h22 swap into it. But I recently found a 4th gen...

I know its not a great question, but im a civic fanboy. What are the main differences between the sh 5th gen and the base model? Especially with having to do with the oil pressure switch? 98 h22a4

Hey guys, wondering if someone here could help me with this one. So I have a 98 Prelude with the h22a4 and it makes an unidentified rattling noise right around 2500 rpm after it has fully warmed up. It also only does it under load, if your off the throttle coasting, it goes away. I was...

I know you all are going to say search the forums, so I will start off by saying that I did and I have found nothing. If it is there I apologize. I just got into the prelude game and just sold my Ej8 civic. I bout the prelude for $2,000 off an evident crackhead and rebuilt the engine and bout...

I am sure this has been discussed before somewhere but I have a few questions regarding pairing a JDM H22A head onto a USDM H22A4 block. I have a 94 Prelude that has a CAI and was caught in a flash flood and well, you can guess what happened there... After getting all the water out and trying...