Search Results for ‘gasket’

Hello everyone, first post and first time Prelude owner. Just bought a 99 Prelude (Manual). Everything is stock except a Magnaflow exhaust and Momo steering wheel. Pretty decent shape, few surface imperfections. Leaks a bit of oil at the left side of the valve cover gasket. I can feel some...

*I am new to the car scene, I have no idea what im looking at or what to do. I do understand that I could just go to a mechanic (I already have a scheduled appointment with one), but I just dont want my car to come out the other side and have no idea what is happening. I am wiling to learn how...

I was driving on the highway and as i was revving up to hit VTEC my car misfired a bunch and as i looked out the rear window there was a lot of white smoke. so i drove until i could find a good place to pull over. checked the coolant. it was fine. no bubbles. checked oil. looked fine (clean and...

My 87 2.0 SI has an idle speed problem. It can be a little difficult to start, but once it does, it idles around 2500. Once heated up, that idle increases to roughly 3000 rpm. The fast idle valve (the valve on the TB closest to the firewall that you access by removing 2 philips head screws)...

What throttle body gasket did you guys use?? the h22 one is not only too small, but due to the FITV, it doesnt seal the jdm throttle body up right. S2000 one work? or did you just make your own? is there a throttle body similar to h23a that will work? (65mm and no FITV) Thanks! and by the...

I recently got m first Prelude, a 1991 SI non 4WS with a 2.1 and 5 speed manual. I only paid a hundred bucks. It runs daily and everything there is just a few problems. We took it to the mechanic for a tune up and he did a compression test, the readings being 180, 20, 20 180. Yesterday I did...

hey guys so a long time ago, while doing my first rebuild in high school (1990 B21a1) i was replacing the intake PGM-FI gasket when i noticed there was two identical gaskets in the box. didn't really think much of it, i just used one and left the other. im looking into rebuilding it again...

Alright guys, i have found a few minor oil leaks in my car, and a major one. THe oring for my distributor busted so its leaking there. The vtec solenoid gasket is done too. And the major one is my Head gasket. So i have a question. Will the helms manual be enough for me to be able to get the...

so i fucked up and never have re-torqued my ARP head studs back down (after 10k miles) and i think i blew a head gasket.. im burning a fuck load of oil (qt every 1.5 weeks) and really dont know whats causing it.. maybe its not the head gasket but i really don't know. ideas on what it could be?