f22

Can anyone please give me the wheel specifications for a 1997 Si Prelude. On the bb5 chassis. Currently has stock wheels but I need specifications so I can look at getting larger rims. I tried to check online, but couldn't find any, would check the car but it's not with my currently. Thank you!

:newbie:Hey guys I wanted to know what I could do to my f22a1 motor to gain power from parts to brands I don't know to much about Hondas since I've been a vette guy for awhile I just picked up this honda and wanted to know witch route I should go with it on a 1500 budget atm I heard that the f22...

Hey guys I wanted to know what I could do to my f22a1 motor to gain power from parts to brands I don't know to much about Hondas since I've been a vette guy for awhile I just picked up this honda and wanted to know witch route I should go with it on a 1500 budget atm I heard that the f22 hold...

Hi, im new here and i am wanting to start a h23 vtec build and Im trying to find out if it is going to be possible to smog it? My build would be ballanced h23 crank/rods type s pistons i would instaul oil squirters in the block ballance shaft eliminator kit port and pollished h22 head skunk 2...

Hey guys I'm not sure if this has been answeres before but wondering if the f22b vtec sohc head would be a straight swap onto the f22a block and would you have tto run a different ecu or can you run it with the f22a ecu?

Is it possible to swap a F22 into a 3rd Generation Prelude?

I just bought my first Honda and I chose a 1992 prelude SOHC 16v F22. And know a little about it but would like to know a whole lot more so if anyone can tell me a little more about my car, I would greatly appreciate it!

Okay guys I have a few extra parts. prices are obo. pics upon request. H22 intake manifold butterfly's removed. H22 egr valve x2 H22 power steering pump and lines no leaks H22 a/c unit and lines no leaks. H23 head bolts (oem) H23 timing belt H23 ecu H23 Injectors H23 fuel rail/fpr (oem)...

Alright, I'm normally in the 3rd gen section but nobody over there seems to know the answer so I figured i would ask u guys. I have a CD5 Acorn with the f22b2 SOHC non-vtec for my daily driver. My question to you guys is this. Would a cam out of an f22a4 fit in its place. The reason I'm askin is...

is an F22b (the Non-vtec motor) at all possible for a swap??? If So.. Where can i get mounts? and i am already OBD1. What else do i need? Has this ever been done or attempted?