Honda Prelude Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 3rd Gen
    I want to swap b20v into my 3rd gen but I overheard someone saying you’ll need a custom mod for certain things. Does anybody know what I need to mod and buy for b20v engine? If I buy CR-V would it comes with everything? thank you- Alex.R
  2. 3rd Gen
    It's a mounting bolt for the power steering pump and it's a 12mm and I can't find it anywhere and I need help!
  3. 3rd Gen
    Can I use the pinch weld beside the jack stand points to jack the car up?
  4. 3rd Gen
    I'm restoring a 91 Prelude alb, it's been sitting for 10 years and rodents have definitely been in the vehicle and in the engine bay! I recently discovered that a wiring harness that goes to the starter, car horn, and more things has been chewed on and separated. I want to solder the wire...
  5. 3rd Gen
    Yesterday I came across what I think is the Ignition Coil and I noticed that there's a black wire that has been split then noticed that there is a black wire on the engine block that's also separated. My question is "Is the black wire on the engine block supposed to be connected to the black...
  6. 3rd Gen
    I'm restoring a 91 Prelude (that's been sitting untouched for 10 years) and was wondering if I should change the coolant, or should I put distilled water in it, or flush the coolant out. I took a look at the radiator from the cap and the coolant it looks like crystallized. Also, I don't know...
1-6 of 6 Results
Top