Honda Prelude Forum banner
3 gen
1-3 of 3 Results
  1. 3rd Gen
    I replaced my head gasket on my b20a5, and when I took it apart I make sure the cam gears were pointing up, then proceeded with the tare down. After I was done cleaning the block and got the head redone I noticed the cylinder wasn't at TDC so I rotated the crank till cylinder #1 was at the top...
  2. Car Entertainment and Security
    Guys, I know a few people were asking if this was possible (four years ago), and I am sure you know now that it is. However, I will give a few tips to those of you who have not yet attempted it. It is not hard, it should fit pretty easily. First off, get a dash install kit for a '96 Accord. It...
  3. 3rd Gen
1-3 of 3 Results