Honda Prelude Forum banner

Search results

1-20 of 467 Results
Advanced Search
  1. New blue Goodridge SS clutch line

    3rd Gen
    I wish the owner of the site would turn it over to someone who has the time to keep this site updated. There are probably updates that need to be completed.
  2. New blue Goodridge SS clutch line

    3rd Gen
    I actually got an email notification. Is the website working again?
  3. 1FunRyd II H23A swap - Rise from the Ashes...

    3rd Gen
    In regards to your cruise control cable. It looks like the plastic bracket that mounts to the fire wall where the cruise control cable goes through was repaired. Mine is broken and I was wondering how did you repair it?
  4. Search function

    3rd Gen
    That really sucks. This website is such a valuable resource for information. Hopefully someone can bring this site back around.
  5. Search function

    3rd Gen
    I am I the only person who can't use the search on here? I have been away for awhile and would like to look up some information and it says search doesn't work.
  6. Rywire clutch master cylinder line

    Everything Else
    I bought this line for my H22 CB7 and used it for a few months. It is compatible with CB7's and H preludes. I decided to upgrade the master cylinder to the S2000 and this line doesn't work with it. So I had to buy another one for the smaller port on the S2000. $50.00 shipped in the US. Paypal...
  7. Cluth M/C

    3rd Gen
    I ordered the whole kit from Ry-Wire which came with a new line. You can order the line separate from them which I assume would make your life a whole lot easier. Wayne
  8. Throttle cable plastic firewall thing

    3rd Gen
    To the right of the MC, the plastic firewall "thing" is broken. It is the bracket the throttle cable passes through. The cruise control plastic thing is broken too. Does anyone have any suggestions to fix them? I tried super glue and that lasted a minute. Wayne
  9. Cluth M/C

    3rd Gen
    I just installed mine and it was a direct bolt up.
  10. Seat Swap

    3rd Gen
    I miss my OEM seats.
  11. YAH22 (Yet Another H22), meet Jynx

    Builds
    I am not 100% but I think you are supposed to "massage" (aka hammer the f*ck out of it) in the area where the pulley's are to make room.
  12. Its been a long time...any oldschooler's still around?

    3rd Gen
    Of course I am still around
  13. My 1989 Honda Prelude Si Turbo

    3rd Gen
    I think its Forza
  14. Elite member perhaps?

    3rd Gen
    Elite = wack :P All I want to know is how to change the font on the left panel from green to anything. LOL
  15. What I Did to the Prelude Today

    3rd Gen
    Other than the dents it looks great
  16. What I Did to the Prelude Today

    3rd Gen
    Your car is always evolving CJ. I put my traction bar on this weekend and it make a big difference. I went with the ESP kit. Of course it took for ever to get it but the price was reasonable. Took a few hours to install the kit because you have to take the lower control arm off the spindle and...
  17. b21 head on b20a5 lower for boost

    3rd Gen
    I am using crower h23 rods and wiseco b20a5 forged pistons. Like Sean said, set your goals before your build. My goal was 300whp and once I achieved it with my tuner I told him to stop. He said my motor had a lot more to give but that was all I wanted. I like driving it more than working on it.
  18. rebuilding block

    3rd Gen
    200whp is nothing to worry about when considering a build.
  19. b21 head on b20a5 lower for boost

    3rd Gen
    I have had both the b20 and b21 head. The b20 was a little quicker and seemed to spool the turbo faster. But I guess if you want to run a ton of boost the b21 would be good. I am currently running 18lbs of boost on the b21 head and if I had to do it again I would have stuck with the b20 head.
1-20 of 467 Results
Top