F/S: H22a4 Block+ Crower Head-CHEAP - Honda Prelude Forum : Honda Prelude Forums
Home Forums Albums Garage iTrader Arcade
Register FAQ Insurance Members List Calendar Mark Forums Read Auto Escrow Advertise

PreludePower.com is the premier Honda Prelude Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
Old 12-01-2011, 08:17 PM   #1
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
H22a4 Block+ Crower Head-CHEAP

I am selling my h22a4 from my 99 Base Prelude.

Reason for selling: My timing belt snapped at around 35 MPH in 4th or 5th gear a few months ago. I immediately shut off the car. I did not run a compression test on the motor in the car, which I should have.I replace the engine with an h23aVTEC and now I have an engine that could still be in perfect running order. The engine had 160,000 miles on it and the head only had 60,000 since the last rebuild which included:

-Crower dual valve springs
-Crower stainless steel 1mm over-sized valves
-Crower titanium retainers
-5 angle valve job

The engine ran strong when I had it and it was always babied. I did an oil change every 3500-4000 miles with mobil1 synthetic 5w-30. I have used most of the pulleys and accessories from the h22a4 in my swap, so what you get is a pretty bare block. This motor is also missing a valve cover. My h23a valve cover was damaged in shipping, but I will include it with the motor for some top end protection. I will include a few left over seals and what not that I can find laying around. The motor has been stored on a pallet while it was not being worked on.

I also have these parts from an h23aVTEC:
-Intake Manifold
-Timing Belt
-Distributor
-Cam gears
-Exhaust Manifold
-Auto tensioner

Here are some pics:


Will come with stock h23a cam gears.



And in the car

http://www.cardomain.com/ride/323658...de#32365870005

Price for the block and head is $325 obo +shipping/paypal/pickup
If you are close to the N.E. Oklahoma area, I will meet you within reasonable distance. I have pretty solid iTrader ratings on this site and positive feedback on eBay as Fildo33.

Thanks for looking.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by zelseman; 12-05-2011 at 12:50 PM.
zelseman is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-02-2011, 08:07 AM   #2
singhayj
True Luder
 
Join Date: Jul 2010
Location: Smyrna, Tn
Age: 39
Posts: 287
singhayj is on a distinguished road
Quote:
Originally Posted by zelseman View Post
I am selling my h22a4 from my 99 Base Prelude.

Reason for selling: My timing belt snapped at around 35 MPH in 4th or 5th gear a few months ago. I immediately shut off the car. I did not run a compression test on the motor in the car, which I should have.I replace the engine with an h23aVTEC and now I have an engine that could still be in perfect running order. The engine had 160,000 miles on it and the head only had 60,000 since the last rebuild which included:

-Crower dual valve springs
-Crower stainless steel 1mm over-sized valves
-Crower titanium retainers
-5 angle valve job

The engine ran strong when I had it and it was always babied. I did an oil change every 3500-4000 miles with mobil1 synthetic 5w-30. I have used most of the pulleys and accessories from the h22a4 in my swap, so what you get is a pretty bare block. This motor is also missing a valve cover. My h23a valve cover was damaged in shipping, but I will include it with the motor for some top end protection. I will include a few left over seals and what not that I can find laying around. The motor has been stored on a pallet while it was not being worked on.

I also have these parts from an h23aVTEC:
-Intake Manifold
-Timing Belt
-Distributor
-Cam gears
-Exhaust Manifold
-Auto tensioner

Here are some pics:


Will come with stock h23a cam gears.



And in the car

http://www.cardomain.com/ride/3236587/1999-honda-prelude#32365870005

Price for the block and head is $325 obo +shipping/paypal/pickup
If you are close to the N.E. Oklahoma area, I will meet you within reasonable distance. I have pretty solid iTrader ratings on this site and positive feedback on eBay as Fildo33.

Thanks for looking.

good price.. shipping quote to 37167?
singhayj is offline   Reply With Quote Quick reply to this message
Old 12-05-2011, 01:03 PM   #3
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by singhayj View Post
good price.. shipping quote to 37167?
The cheapest shipping I could find was $225 so it would be $575 shipped.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
 
Old 12-05-2011, 03:16 PM   #4
acidcrakker
Back 2 Hackin
 
acidcrakker's Avatar
 
Join Date: Dec 2007
Location: Lumberton
Age: 36
Posts: 4,375
acidcrakker has a spectacular aura aboutacidcrakker has a spectacular aura aboutacidcrakker has a spectacular aura about

How much just for head
__________________
Honda prelude, since 1992
acidcrakker is offline   Reply With Quote Quick reply to this message
Old 12-05-2011, 08:31 PM   #5
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by acidcrakker View Post
How much just for head
Id like to keep it together as of right now. I have a little interest from a few places. If you can find someone that wants the block or if I get some interest from someone for just the block, we can make a deal.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 12-06-2011, 09:32 PM   #6
shevelle6t9
Lude Dude
 
Join Date: Oct 2007
Posts: 111
shevelle6t9 is on a distinguished road
shipped to 68504?
shevelle6t9 is offline   Reply With Quote Quick reply to this message
Old 12-07-2011, 11:28 AM   #7
Bruised_ego
I am Prelude
 
Bruised_ego's Avatar
 
Join Date: Sep 2008
Location: Belly of the east
Posts: 3,119
Bruised_ego has a spectacular aura aboutBruised_ego has a spectacular aura about

Prelude of the Month
Good deal! Glws
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Bruised_ego is offline   Reply With Quote Quick reply to this message
Old 12-07-2011, 04:24 PM   #8
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by shevelle6t9 View Post
shipped to 68504?
Shipping is $260. So a total of $585 shipped.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 12-17-2011, 10:36 AM   #9
Kane666
Banned
 
Kane666's Avatar
 
Join Date: Jul 2006
Location: York, PA
Age: 36
Posts: 4,057
Kane666 has a spectacular aura aboutKane666 has a spectacular aura about
Send a message via AIM to Kane666
interested in block only. 17402
Kane666 is offline   Reply With Quote Quick reply to this message
Old 12-21-2011, 03:17 PM   #10
jdmcg3
Getting Comfortable
 
Join Date: Oct 2011
Location: Tacoma, Wa
Posts: 63
jdmcg3 is on a distinguished road
im interested in the head..
jdmcg3 is offline   Reply With Quote Quick reply to this message
Old 12-26-2011, 07:58 PM   #11
DonDominican
Ludacious
 
DonDominican's Avatar
 
Join Date: Mar 2007
Location: Winter Park, Fl
Posts: 1,598
DonDominican is on a distinguished road
interested in head, if you decide to sell the block would you be able to take pics of the bottom of the head? Ideally i would just like the valve springs retainers and if the valves arent bent those as well
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
DonDominican is offline   Reply With Quote Quick reply to this message
Old 12-28-2011, 01:43 AM   #12
jdmcg3
Getting Comfortable
 
Join Date: Oct 2011
Location: Tacoma, Wa
Posts: 63
jdmcg3 is on a distinguished road
i lived closer too you.. i would come buy it in a heart beat!

someone buy this thing for AMAZING price.

glws
jdmcg3 is offline   Reply With Quote Quick reply to this message
Old 12-28-2011, 01:25 PM   #13
BB4Flash07
Lude Dude
 
BB4Flash07's Avatar
 
Join Date: Dec 2007
Location: Raleigh, NC
Posts: 219
BB4Flash07 is on a distinguished road
Send a message via Yahoo to BB4Flash07
how much shipped to 27401 and i have a skunk2 head if you would like to take a trade?
__________________
X.O.P. Flash

1992 Honda Prelude 4WS SI -(totaled) RIP
1993 Honda Prelude 4WS SI -(current)
* Cold Air Intake
* Custom 2.5'' exhaust
* 16" Sportmax 002s
* 8000k HID kit
* TEIN BASIC coilovers
* Depo projectors 1pc
~Swap coming soon~
BB4Flash07 is offline   Reply With Quote Quick reply to this message
Old 01-08-2012, 05:46 PM   #14
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by BB4Flash07 View Post
how much shipped to 27401 and i have a skunk2 head if you would like to take a trade?
Shipping is $250.
Quote:
Originally Posted by Kane666 View Post
interested in block only. 17402
Shipping is $200.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 01-10-2012, 08:17 AM   #15
Scuberz892.0si4WS
Lude Dude
 
Scuberz892.0si4WS's Avatar
 
Join Date: Feb 2009
Location: Fort Wayne, Indiana
Age: 30
Posts: 137
Scuberz892.0si4WS is on a distinguished road
How much is it shipped to 46808?
__________________
1989 Red 2.0si 4ws 5 speed (in storage)
1998 White Diamond Base Auto (Daily Driver)







"I'm so JDM my passengers have to order me food through the drive-thru"
Scuberz892.0si4WS is offline   Reply With Quote Quick reply to this message
Old 01-10-2012, 02:48 PM   #16
afrotec
True Luder
 
afrotec's Avatar
 
Join Date: Sep 2010
Location: Chicago
Posts: 339
afrotec is on a distinguished road
I want to get this from you really bad. Lol I'm gonna see what I can do. No leakdown ever done on it right?
afrotec is offline   Reply With Quote Quick reply to this message
Old 01-10-2012, 03:20 PM   #17
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by Scuberz892.0si4WS View Post
How much is it shipped to 46808?
$585
Quote:
Originally Posted by afrotec View Post
I want to get this from you really bad. Lol I'm gonna see what I can do. No leakdown ever done on it right?
No leakdown or compression test has been done. AS IS. Let me know, I am trying to get rid of this to get my car running again. My loss is your gain.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 01-11-2012, 04:37 PM   #18
k20crx
Getting Comfortable
 
k20crx's Avatar
 
Join Date: Jul 2011
Location: NAMPA IDAHO!!
Posts: 97
k20crx is on a distinguished road
how much shipped to 83651 in idaho

im really interested ive been looking for a block for a while!
__________________
idahomotorsports.com

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

88' EF8 si d16y8.. traded
89' 325i ka-t
95' civic EX- vtec-e swap
00' prelude h22a swap with nitrous
k20crx is offline   Reply With Quote Quick reply to this message
Old 01-23-2012, 03:34 PM   #19
jacobsizemore1
Newbie
 
Join Date: Jan 2012
Posts: 1
jacobsizemore1 is on a distinguished road
Very interested

Very interested. Please PM for my number so we can set this up. If you still have it that is.
jacobsizemore1 is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 07:40 PM   #20
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by jacobsizemore1 View Post
Very interested. Please PM for my number so we can set this up. If you still have it that is.
Dude, you have 1 post. You would have to show verifiable feedback from at least one other source for me to even consider doing business with you.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 08:48 PM   #21
ilovemy6thgen
Getting Comfortable
 
Join Date: Jan 2012
Posts: 17
ilovemy6thgen is on a distinguished road
pm'd
ilovemy6thgen is offline   Reply With Quote Quick reply to this message
Old 01-25-2012, 02:59 PM   #22
acidcrakker
Back 2 Hackin
 
acidcrakker's Avatar
 
Join Date: Dec 2007
Location: Lumberton
Age: 36
Posts: 4,375
acidcrakker has a spectacular aura aboutacidcrakker has a spectacular aura aboutacidcrakker has a spectacular aura about

Yo I still got dibs on the head first.

If you want to verify that the head and block are still good. Take the head off the block and take the cams out and look at how the valves are seated in the head. Than put it back on with a new timing belt and crank it over by hand and see if you hear compression coming out with each rotation in all four cylinders.
__________________
Honda prelude, since 1992
acidcrakker is offline   Reply With Quote Quick reply to this message
Old 02-06-2012, 10:46 AM   #23
zelseman
I am Prelude
 
zelseman's Avatar
 
Join Date: Jan 2006
Location: Tahlequah, OK
Posts: 2,828
zelseman is on a distinguished road
Quote:
Originally Posted by acidcrakker View Post
Yo I still got dibs on the head first.

If you want to verify that the head and block are still good. Take the head off the block and take the cams out and look at how the valves are seated in the head. Than put it back on with a new timing belt and crank it over by hand and see if you hear compression coming out with each rotation in all four cylinders.
You still have dibs on the head if I separate them. But I don't have the time to separate them at the moment. I am a full time student and don't have the time to work on my project and take apart another motor. The soonest I would be able to separate them is probably mid-may.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
zelseman is offline   Reply With Quote Quick reply to this message
Old 02-06-2012, 12:07 PM   #24
timoram
Getting Comfortable
 
Join Date: Mar 2011
Posts: 36
timoram is on a distinguished road
If you end up parting it out, let me know about the head.

Tim
timoram is offline   Reply With Quote Quick reply to this message
Old 02-06-2012, 07:49 PM   #25
ludist
Lude Cray
 
ludist's Avatar
 
Join Date: Oct 2009
Location: Oak Creek, CO
Age: 50
Posts: 873
ludist has a spectacular aura aboutludist has a spectacular aura about
Quote:
Originally Posted by zelseman View Post
You still have dibs on the head if I separate them. But I don't have the time to separate them at the moment. I am a full time student and don't have the time to work on my project and take apart another motor. The soonest I would be able to separate them is probably mid-may.
If you haven't sold the whole motor by then, I'll take the block.
__________________
1995
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Si H23a1 M2S4 (runner, project)
1970
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
2206009 (project)
2002 Dodge Cummins 24v 4x4 NV5600 (daily driver)
1995 Dodge Cummins 12v dually (work truck)
1976 BMW R90S, Daytona Orange (grocery getter)
1987 Freightliner FLU-419 SEE (pond digger)
1989 Freightliner FLU-10344 HMMH (crane truck)
1977 GMC 26' Motorhome (huntin' cabin)
1978 VW Scirocco (motorhome dinghy)
ludist is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Bookmarks

Tags
5th gen, block, h22a4, head, swap

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Prelude Forum : Honda Prelude Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
Type the last 3 characters on the Prelude license plate displayed at the top left of the page: FSV _ _ _
Insurance
Please select your insurance company (Optional)

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:51 AM.



Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002 - 2011, Preludepower.com
PreludePower Forums