..::: 5th Gen Newbie - Q&A Thread :::.. (New Members, PLEASE CLICK HERE) - Page 205 - Honda Prelude Forum : Honda Prelude Forums
Home Forums Albums Garage iTrader Arcade
Register FAQ Insurance Members List Calendar Mark Forums Read Auto Escrow Advertise

PreludePower.com is the premier Honda Prelude Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
Old 05-20-2018, 10:21 PM   #5101
Wing8806
Faptastic
Curveball Champion, Alien Clones Champion
 
Wing8806's Avatar
 
Join Date: Nov 2007
Posts: 6,333
Wing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to all
Quote:
Originally Posted by joelcaris View Post
quick question, ive heard a few rumors about the h22 being sort of specific to needing premium gas??? i also have a jetta 1.8t and i can tell you that running 93 makes a big difference. i just got my prelude a few days ago and was just looking for some sort of input. thanks


Whichever your high grade gasoline is for your area - that's what you should run. Not everyone has 93 readily available so 91 or 92 will do just fine.
__________________
2001 Prelude - Project
2008 Mugen Si - Daily
Do not trust Kane666 aka Jason Myers.
Wing8806 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-20-2018, 10:59 AM   #5102
GETTHOSEFUKNLUDES
Newbie
 
GETTHOSEFUKNLUDES's Avatar
 
Join Date: Jul 2018
Location: Orange County, CA
Posts: 2
GETTHOSEFUKNLUDES is on a distinguished road
Post rebuilding a beat up 1997 manual base, need certain parts

i finally got around to making an account even though on my second lude (1997 Prelude base manual) the other weekend the captcha puzzles were fucking retarded i literally did 40 of them or more and still couldnt make an account. probably cuz i threw my phone on the 40th or so correct answer just to be asked to click on more bus's lol


okay so i need some help locating...

-passenger side rear view mirror
-passenger side sun visor
-budget aftermarket remote kill switch / gps / ejection seats / etc via cell connection NOT 2g, 3g or better
-budget 1 or 2 channel amp to supplement the one i already put in
-budget 12 to 18 in woofer to go with secondary amp
-bang for buck exhaust / headers reccomendations

-a big aftermarket center rear view mirror. not 400mm. For my last lude and benz I found a classy solution in modifying a $14 truck mirror from oreilleys to fit my 97 e420 benz by mounting it onto the passenger sun visor. it worked fine until i flipped it (the car, not the visor). the mirror in question fit uncomfortably in my last lude (4th gen) and my 5th gen it doesnt fit at all, it simply takes up a dangerous amount of visibility and i need something smaller. like 550mm maybe... any advice would be appreciated
-my exhaust looks like... ill keep it civil for my first post. my exhaust looks bad. lol sand that shit down then polish perhaps? its completely black

--edit-- o yeah and i have this poorly done / heavily weathered rear tint which is like a hot pocket. crispy tasty tender flaky crust. how do i get this bullshit off without harming the heating filament / antennae on the rear glass?

thanks guys

Last edited by GETTHOSEFUKNLUDES; 07-20-2018 at 11:13 AM.
GETTHOSEFUKNLUDES is offline   Reply With Quote Quick reply to this message
Old 07-23-2018, 05:49 PM   #5103
Wing8806
Faptastic
Curveball Champion, Alien Clones Champion
 
Wing8806's Avatar
 
Join Date: Nov 2007
Posts: 6,333
Wing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to all
Quote:
Originally Posted by GETTHOSEFUKNLUDES View Post
i finally got around to making an account even though on my second lude (1997 Prelude base manual) the other weekend the captcha puzzles were fucking retarded i literally did 40 of them or more and still couldnt make an account. probably cuz i threw my phone on the 40th or so correct answer just to be asked to click on more bus's lol


okay so i need some help locating...

-passenger side rear view mirror
-passenger side sun visor
-budget aftermarket remote kill switch / gps / ejection seats / etc via cell connection NOT 2g, 3g or better
-budget 1 or 2 channel amp to supplement the one i already put in
-budget 12 to 18 in woofer to go with secondary amp
-bang for buck exhaust / headers reccomendations

-a big aftermarket center rear view mirror. not 400mm. For my last lude and benz I found a classy solution in modifying a $14 truck mirror from oreilleys to fit my 97 e420 benz by mounting it onto the passenger sun visor. it worked fine until i flipped it (the car, not the visor). the mirror in question fit uncomfortably in my last lude (4th gen) and my 5th gen it doesnt fit at all, it simply takes up a dangerous amount of visibility and i need something smaller. like 550mm maybe... any advice would be appreciated
-my exhaust looks like... ill keep it civil for my first post. my exhaust looks bad. lol sand that shit down then polish perhaps? its completely black

--edit-- o yeah and i have this poorly done / heavily weathered rear tint which is like a hot pocket. crispy tasty tender flaky crust. how do i get this bullshit off without harming the heating filament / antennae on the rear glass?

thanks guys
Broadway mirror overlays are nice. Flip down both sun visors and measure the distance between - that's how I determined the size I needed back when I had one. If I knew where It was....i'd simply measure for you

Visors and side view mirrors - partouts here, ebay, facebook marketplace, craigslist etc.

Can't help with audio and security items

Depends on how bad your exhaust really is. Just dirty or falling apart? Depending on what it's made of - could use a restoration. I personally scuffed my header down and painted it silver with high temp paint. As for the exhaust - painted that black and kept a polished tip.
__________________
2001 Prelude - Project
2008 Mugen Si - Daily
Do not trust Kane666 aka Jason Myers.
Wing8806 is offline   Reply With Quote Quick reply to this message
Old 08-21-2018, 11:19 AM   #5104
RWBY-Tech
Newbie
 
RWBY-Tech's Avatar
 
Join Date: Aug 2018
Posts: 2
RWBY-Tech is on a distinguished road
P0325 - 99 'Lude 2.3 SH

We've had this 1999 2.3L SH since '08 and have done all maintenance ourselves. A few months back started popping CELs. We got the EGR valve replaced and then started getting P0325 (knock sensor). We replaced the (broken) knock sensor and all the intake gaskets etc. The P0325 cleared and all the DTC checks passed. Less than 24 hours later the CEL was back with P0325. We have already verified the knock sensor is still good (we didn't break it putting the intake manifold back in). Cleared the codes and it came back within 10 minutes. Cleared again and it was more than 24 hours before it came back. Intermittent issues are the worst. Please help! Can't pass emissions with P0325.
RWBY-Tech is offline   Reply With Quote Quick reply to this message
Old 08-23-2018, 04:59 PM   #5105
Wing8806
Faptastic
Curveball Champion, Alien Clones Champion
 
Wing8806's Avatar
 
Join Date: Nov 2007
Posts: 6,333
Wing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to all
Quote:
Originally Posted by RWBY-Tech View Post
We've had this 1999 2.3L SH since '08 and have done all maintenance ourselves. A few months back started popping CELs. We got the EGR valve replaced and then started getting P0325 (knock sensor). We replaced the (broken) knock sensor and all the intake gaskets etc. The P0325 cleared and all the DTC checks passed. Less than 24 hours later the CEL was back with P0325. We have already verified the knock sensor is still good (we didn't break it putting the intake manifold back in). Cleared the codes and it came back within 10 minutes. Cleared again and it was more than 24 hours before it came back. Intermittent issues are the worst. Please help! Can't pass emissions with P0325.
Did you use a factory knock sensor or an aftermarket? It's common for aftermarket to be a hit or miss, but hard to swallow the cost of a factory sensor.
__________________
2001 Prelude - Project
2008 Mugen Si - Daily
Do not trust Kane666 aka Jason Myers.
Wing8806 is offline   Reply With Quote Quick reply to this message
Old 08-24-2018, 08:09 AM   #5106
RWBY-Tech
Newbie
 
RWBY-Tech's Avatar
 
Join Date: Aug 2018
Posts: 2
RWBY-Tech is on a distinguished road
Quote:
Originally Posted by Wing8806 View Post
Quote:
Originally Posted by RWBY-Tech View Post
We've had this 1999 2.3L SH since '08 and have done all maintenance ourselves. A few months back started popping CELs. We got the EGR valve replaced and then started getting P0325 (knock sensor). We replaced the (broken) knock sensor and all the intake gaskets etc. The P0325 cleared and all the DTC checks passed. Less than 24 hours later the CEL was back with P0325. We have already verified the knock sensor is still good (we didn't break it putting the intake manifold back in). Cleared the codes and it came back within 10 minutes. Cleared again and it was more than 24 hours before it came back. Intermittent issues are the worst. Please help! Can't pass emissions with P0325.
Did you use a factory knock sensor or an aftermarket? It's common for aftermarket to be a hit or miss, but hard to swallow the cost of a factory sensor.
It was aftermarket but looks identical to the one we took out (just not broken in half). Unfortunately don't have the $150 for the factory sensor.
RWBY-Tech is offline   Reply With Quote Quick reply to this message
Old 08-29-2018, 02:33 PM   #5107
Rabid_ace
Newbie
 
Join Date: Aug 2018
Posts: 1
Rabid_ace is on a distinguished road
Shocks and Struts

I have a 99 Prelude I bought a about a year ago and I'm getting joints and all inspected and replaced as need. This lead me to wanting to replace my Shocks and struts as well. I've been reading all over and I found the KYB AGX for a really good price but now I need springs, but prefer not to have lowered ones. Every were I look I only see people talking about lowering springs and online I can only find lowering springs. So my question is where can I find good stock height springs.
Rabid_ace is offline   Reply With Quote Quick reply to this message
Old 08-30-2018, 05:11 PM   #5108
Wing8806
Faptastic
Curveball Champion, Alien Clones Champion
 
Wing8806's Avatar
 
Join Date: Nov 2007
Posts: 6,333
Wing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to all
Quote:
Originally Posted by Rabid_ace View Post
I have a 99 Prelude I bought a about a year ago and I'm getting joints and all inspected and replaced as need. This lead me to wanting to replace my Shocks and struts as well. I've been reading all over and I found the KYB AGX for a really good price but now I need springs, but prefer not to have lowered ones. Every were I look I only see people talking about lowering springs and online I can only find lowering springs. So my question is where can I find good stock height springs.
Re-using the original springs or lowering springs are the only options i've read about for the last gen Preludes. Or go the coil-over route and keep it raised up.
__________________
2001 Prelude - Project
2008 Mugen Si - Daily
Do not trust Kane666 aka Jason Myers.
Wing8806 is offline   Reply With Quote Quick reply to this message
Old 01-09-2019, 06:56 AM   #5109
hardleers
Newbie
 
Join Date: Jan 2019
Posts: 1
hardleers is on a distinguished road
Hi Guys, new here, but the search aint working at the moment... A quick question: Will a H22 exhaust manifold fit a F20A4 engine? I can get a seriously sweet deal on a new 4-2-1, but no use if it won't fit.

Thnx in advance!
hardleers is offline   Reply With Quote Quick reply to this message
Old 01-13-2019, 04:14 PM   #5110
GioDappBB6
Newbie
 
Join Date: Jan 2019
Posts: 1
GioDappBB6 is on a distinguished road
Exclamation Swap Help!!! New N00b

I have a 97 Prelude SH and I'm getting rid of the H22A4 - M2Y4 and I would like to put in a H22A - T2W4. I've been told numerous different things as to installation but it was never confirmed... So can anyone tell me what I really have to buy for this swap to work?*

Thanks, GioDappBB6
GioDappBB6 is offline   Reply With Quote Quick reply to this message
Old 01-13-2019, 06:13 PM   #5111
DaftC
Newbie
 
Join Date: Jan 2019
Posts: 1
DaftC is on a distinguished road
Modification for an S2000 airbag?

I have an RSX steering wheel, and an S2000 AP1 airbag that I plan on installing on my 2000 Type SH.

This guy says "you need to make a small hole to accommodate for the ATTS system"
https://www.preludepower.com/forums/...10&postcount=3

Any idea how true this is? Where do I need to make a hole?
DaftC is offline   Reply With Quote Quick reply to this message
Old 01-18-2019, 05:55 PM   #5112
nickmopar1970
Newbie
 
Join Date: Jan 2019
Posts: 1
nickmopar1970 is on a distinguished road
prelude code issues

1998 honda prelude with euro r swap

So I just recently bought the vechicle, and owner had down the euro swap on it. the car runs fine, idle stays around 1000 rpm's, vtec hits around 5500rpm's, throtle repsonse is great, etc..

I went to emmsions and my computer wasnt linking up to the cade scanner/diag computer.

So i hooked up the old one and it links up, awesome, so im driving home and the check engine starts flashing, (damn), so i took it to auto zone and got P1399 and P300.

To summarize, the codes were blocked egr passage, valve clearance out of range, fuel system concern, ignition system concern, MAF sensor faulty, HO22/AF, and clocked intake or exhaust system.

Could the codes be popping up because its a different engine? could I actually have those problems even tho my engine seems to be running just fine? is the computer screwed?

is there any differences in timing between euro r h22 and the original h22.

I need to get past emissions, any info you have would help. thanks.
nickmopar1970 is offline   Reply With Quote Quick reply to this message
Old 01-28-2019, 06:25 AM   #5113
TylerRiley
Newbie
 
Join Date: Jan 2019
Posts: 2
TylerRiley is on a distinguished road
Looking at Purchasing a Prelude... Need your Advice on it

Thanks for the add! I am looking at getting a 5th gen prelude here in the near future. This will be my first ever owned car so Itīs quite exciting because I can now learn about the internals of a car and be able to work on one in the comfort of my own home. Here is a link that will take you to the Prelude I am currently looking at. It only has 109k miles and the paint is flawless. Unfortunately it is an automatic, but I am only getting automatic right now because my parents do not want me to get anything that is ancient, so I am hoping that the automatic transmission with low miles will help persuade them. let me know what you guys think about this prelude because I would hate to know I am getting ripped off.
https://www.cargurus.com/Cars/l-Used...ting=229855117

Anyways, thanks for viewing and please do let me know what you think.
TylerRiley is offline   Reply With Quote Quick reply to this message
Old 02-10-2019, 07:30 PM   #5114
Wing8806
Faptastic
Curveball Champion, Alien Clones Champion
 
Wing8806's Avatar
 
Join Date: Nov 2007
Posts: 6,333
Wing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to allWing8806 is a name known to all
Quote:
Originally Posted by nickmopar1970 View Post
1998 honda prelude with euro r swap

So I just recently bought the vechicle, and owner had down the euro swap on it. the car runs fine, idle stays around 1000 rpm's, vtec hits around 5500rpm's, throtle repsonse is great, etc..

I went to emmsions and my computer wasnt linking up to the cade scanner/diag computer.

So i hooked up the old one and it links up, awesome, so im driving home and the check engine starts flashing, (damn), so i took it to auto zone and got P1399 and P300.

To summarize, the codes were blocked egr passage, valve clearance out of range, fuel system concern, ignition system concern, MAF sensor faulty, HO22/AF, and clocked intake or exhaust system.

Could the codes be popping up because its a different engine? could I actually have those problems even tho my engine seems to be running just fine? is the computer screwed?

is there any differences in timing between euro r h22 and the original h22.

I need to get past emissions, any info you have would help. thanks.
Depends on how the swap was done. Did the previous owner swap over all of the H22a4 sensors etc or did they just drop in the current motor.

Do you have an EGR valve on the manifold? Which manifold is even on the car - H22a4 or Euro-R manifold?

For the car to pass emissions via an obd2 plug in test, you would need all of the same readings off the new motor as if it were the original - if that makes sense. The Euro-R motor in it's original state, would not put out those readings.

Quote:
Originally Posted by TylerRiley View Post
Thanks for the add! I am looking at getting a 5th gen prelude here in the near future. This will be my first ever owned car so Itīs quite exciting because I can now learn about the internals of a car and be able to work on one in the comfort of my own home. Here is a link that will take you to the Prelude I am currently looking at. It only has 109k miles and the paint is flawless. Unfortunately it is an automatic, but I am only getting automatic right now because my parents do not want me to get anything that is ancient, so I am hoping that the automatic transmission with low miles will help persuade them. let me know what you guys think about this prelude because I would hate to know I am getting ripped off.
https://www.cargurus.com/Cars/l-Used...ting=229855117

Anyways, thanks for viewing and please do let me know what you think.

Inspect the quarters for rust, question the maintenance such as timing belt and water pump. Look in the trunk, beneath the carpet and spare tire, for water or signs of water (common issues due to tail light seals or clogged sunroof drain tubes). Inspect the car very very carefully for any signs of being repainted (overspray, sand paper marks, noticeably misaligned body panesl). Check the suspension for torn bushings (although uncommon at that low mileage, always good to check anyway). Be very very cautious due to the automatic transmission since they are known for having issues. If you're able to with an obd2 reader of some sort, check that the readiness codes are all set. If they are not, the check engine light has been recently cleared.


Even with the mileage, I would be hesitant spending $4,000 on a car that could potentially need $2,000 in maintenance and repairs within a short period. So ask questions
__________________
2001 Prelude - Project
2008 Mugen Si - Daily
Do not trust Kane666 aka Jason Myers.
Wing8806 is offline   Reply With Quote Quick reply to this message
Old 08-01-2019, 11:54 PM   #5115
JonnyRubiks
Newbie
 
Join Date: Aug 2019
Posts: 1
JonnyRubiks is on a distinguished road
Gunpowder smell?

I did my due diligence and tried searching the forums first to see if anyone else has asked this, but the site kept giving me an error saying search was disabled due to server load. So here I am.

I just recently bought a 2001 Prelude (base model) and everything looks and runs great. Underneath is super clean and there are no apparent leaks. The oil pan gasket is dry. However, whenever I drive it and get rpms near V-tech level, I start to smell a very gunpowdery smell. Not burning oil, but the best I know how to describe it is like burnt gunpowder. I've been paying attention to my oil levels, and it is clearly not burning oil. Besides, burning oil smells different. Plus I don't have any smoke.

Anyone experience this before? Is this what a bad cat converter smells like?
JonnyRubiks is offline   Reply With Quote Quick reply to this message
Old 08-03-2019, 06:19 AM   #5116
mykizism
Lude Addict
 
mykizism's Avatar
 
Join Date: Oct 2006
Location: GarageParkAuto.com
Posts: 643
mykizism is on a distinguished road

Prelude of the Month
Quote:
Originally Posted by JonnyRubiks View Post
I did my due diligence and tried searching the forums first to see if anyone else has asked this, but the site kept giving me an error saying search was disabled due to server load. So here I am.

I just recently bought a 2001 Prelude (base model) and everything looks and runs great. Underneath is super clean and there are no apparent leaks. The oil pan gasket is dry. However, whenever I drive it and get rpms near V-tech level, I start to smell a very gunpowdery smell. Not burning oil, but the best I know how to describe it is like burnt gunpowder. I've been paying attention to my oil levels, and it is clearly not burning oil. Besides, burning oil smells different. Plus I don't have any smoke.

Anyone experience this before? Is this what a bad cat converter smells like?

Bad cat converter usually smells like rotten eggs, or something foul. Not sure what you are smelling. Is your car automatic or manual transmission?
__________________
1999 Honda Prelude Turbo

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

mykizism is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Bookmarks

Tags
2000 base, 5th gen, atts, base, bb6, clutch, clutch replacement, computer, door, e brake, electrical problem, engine, exhaust, h22a swap, headlights, highbeams, injectors, limp mode, lock, loop, manual, obx, piping, prelude, rev limiter, seats, switch, transmission, twin, type s

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Prelude Forum : Honda Prelude Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
Type the last 3 characters on the Prelude license plate displayed at the top left of the page: FSV _ _ _
Insurance
Please select your insurance company (Optional)

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Group Buy Blacklisted Members - Non-Payers!! 1funryd FeedBack 34 09-15-2008 12:54 AM
Updated- You might own a 5th Gen if... prelude2perfect 5th Gen 64 01-22-2008 11:52 AM
My 5th Gen vs 5th Gen vs Si vs Z3 and a Viper by accident. PR Papi Street Racing 4 01-19-2005 11:09 AM
3rd gen, 5th gen, and... I'm not sure what it was... liquid51 Street Racing 5 06-29-2004 12:42 PM
4th Gen Vs. 5th Gen - Which is better? OniBonesSi 5th Gen 11 10-14-2002 05:51 AM


All times are GMT -6. The time now is 09:35 PM.



Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright Đ2002 - 2011, Preludepower.com
PreludePower Forums