Turbo Setup STICKY - Page 3 - Honda Prelude Forum : Honda Prelude Forums
Home Forums Albums Garage iTrader Arcade
Register FAQ Insurance Members List Calendar Mark Forums Read Auto Escrow Advertise

PreludePower.com is the premier Honda Prelude Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
Old 03-19-2010, 01:38 AM   #51
archie21
Lude Dude
 
Join Date: Jan 2009
Location: Grandville, Mi
Posts: 103
archie21 is on a distinguished road
[Car And Motor]
1991 Prelude Si
B20A5
wiseco forged pistons
sparks forged hbeam rods
supertech h22 valve springs
arp studs

[Turbo Parts]
Garret-AiResearch T3 IWG
H22 manifold
JDM Poonage intercooler and piping
Greddy BOV
Custom DP

[Fuel Management]
p06 and phearable.net chip kit/basemap

[Boost]
5psi so far

[No Tune, Street Tune, Dyno Tune]
not that far yet unfortunately

[Notes]
will be adding 880 precision injectors and push 25psi once tuned.

__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by archie21; 03-30-2010 at 11:40 PM. Reason: whoring out pics
archie21 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-30-2011, 07:18 AM   #52
jebat_preluder
Getting Comfortable
 
Join Date: Dec 2009
Posts: 18
jebat_preluder is on a distinguished road
[Car And Motor]
1993 ba8 Prelude
jdm h22a 80% stock


[Turbo Parts]
Td04
h22a custom turbo header
custom turbo piping
tial wastegate 38mm
custom downpipe
bov sqv hks
evo3 intercooler
apexi fake boost meter



[Fuel Management]
p28 with s300 hondata chipping
510cc evo 3 injector

[Boost]
7psi @ 0.5bar so far

dynojet
268.1hp
231.2 tork
afr 11.3


Last edited by jebat_preluder; 03-30-2011 at 07:20 AM. Reason: add info
jebat_preluder is offline   Reply With Quote Quick reply to this message
Old 09-27-2011, 08:57 AM   #53
typemismatch
Getting Comfortable
 
Join Date: Aug 2011
Posts: 38
typemismatch is on a distinguished road
[Car And Motor]
1992 Prelude S full interior
JDM H22A

[Internals]
CP pistons (10:1 CR)
Pauter X-beam rods
ARP head studs, main and rod bolts
Skunk2 valves, retainers, dual valve springs
GE sleeved and o-ring
OEM Honda headgasket
Stock H22 cams and gears
Nippon Eneos 0-50W oil

[Extra Stuff]
Generic Oil Catch Can
NGK plug wires
NGK plugs
Skunk2 intake manifold
KS H23 tensioner conversion
KS Balance shaft eliminator
GReddy timing belt

[Tranny]
T2T4 JDM LSD
Comp Clutch 6-puck sprung hub
Comp Clutch lightweight flywheel
Comp Clutch pressure plate

[Turbo]
Precision PTE 5857 .63 A/R turbine, ported shroud S compressor cover
Treadstone TRE8 or TRE10? intercooler and 2.5" piping kit
LoveFab mini-me equal length turbo manifold
LoveFab 3" down pipe, open down pipe
Tial 44mm Wastegate, open dump
Tial 50mm BOV
Hondata boost control solenoid

[Fuel Management]
Hondata S300 with P72 ECU
AEM Uego Wide band O2 With gauge
GM 3 bar map sensor
Injector Dynamics ID1000cc injectors
AEM fuel rail/FPR
Walbro 255lph fuel pump
E85

[Dyno Tune]
Tuned by Shane @ DBPerformance in Rogers, MN
469.8hp/340tq @ 15psi max
415hp/280tq @ 12psi current tune

[Future]
Upgraded fuel system:
Walbro 400lph in-tank
Injector Dynamics ID2000cc or FIC 2150cc injectors
-8 AN fuel lines
Kenne Bell boost a pump
Direct power fuel relay mod

[Notes]
Ran out of injector at 15psi with fuel pressure set to stock base 43.5psi
__________________
1992 Prelude S - 469hp/[email protected] - [email protected]
2007 Civic Si - FG2 - almost stock (DD)
92 EG H2B - build thread
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
typemismatch is offline   Reply With Quote Quick reply to this message
 
Old 09-27-2011, 03:50 PM   #54
gc8dc95
Lude Boss
 
Join Date: Oct 2006
Age: 33
Posts: 1,987
gc8dc95 is on a distinguished road
[Car]
1989 Honda Prelude 2.0Si

[Engine]
B20A5
81.5mm Wiseco Pistons 9:1
Bisimoto I-Beam Rods
Cometic Headgasket
ARP Headstuds

[Turbo]
Precision SC6152E .63ar
CX Racing FMIC
Tial Bov
Tial V44 Wastegate
WeiRtech Tubular Manifol

[Fuel]
5gal Fuel Cell
Inline Walbro 255 and Bosch 044
-8an Fuel Lines
Rosko Racing Fuel Rail
1000cc PTE Injectors

[Electronics]
MSD Digital 6
HVC-II Coil
Chipped P06 with Ectune

[Tires]
MH 24.5x8.5x15 Slicks

Tuned on VP [email protected] = 420whp 340wtq
Best 1/4 = [email protected]
Best 1/8 = [email protected]

The car has more in it with some more boost, better driving, and headwork.



__________________
89 Prelude SI Turbo [email protected] 420whp/340wtq 1/4 = [email protected]
gc8dc95 is offline   Reply With Quote Quick reply to this message
Old 05-11-2012, 04:54 PM   #55
phattzy
True Luder
 
phattzy's Avatar
 
Join Date: Mar 2009
Location: australia
Posts: 477
phattzy is on a distinguished road

Prelude of the Month
[CAR]
89 Honda Prelude SI 4WS

[ENGINE]
- b20a6 fully forged bottom end
- scat h22a h-beam rods
- acl race series bearings
- decked and honed block
- custom dished JE pistons C/R 8.5:1
- JE pistons pro-seal ring kit
- 5 layer cometic MLS head gasket
- heavily port/polished head
- decked head
- heavier springs
- custom oversized fuel rail
- twin feed rail
- bosch 1680cc indy blue injectors
- 3/8 billet inline fuel filter
- upgraded 3/8 fuel lines
- walbro 255lph lift pump
- 3ltr surge tank
- modifed intank chamber
- double spacer ( blacktrax style ) plenum
- modifed h22 throttle body
- custom steam pipe top mount turbo manifold
- turbonetics twin scroll gtk 450 turbo
- turbosmart 38mm ultra gate with 14psi spring
- turbosmart eboost2 EBC
- turbosmart type3 supersonic BOV
- 2.5 " hot pipe -- 800/400/75mm intercooler -- 3" cold pipe
- AEM adjustable cam gears
- gates racing timing belt
- sard FPR
- excel super coil
- topgun 8.8mm race leads
- 2.5" dump pipe
- 3" stainless full exhaust
- magnaflow highflow cat
- soild engine mounts
- adaptronics E420C ECU
- custom stainless airbox
- custom stainless catch can
- x3 -10 elbows
- x2 5/8" ORTAC breather hose
- SPEX 1/10 hour meter
- Innovate motorsports LC1 wideband

DRIVELINE
- stage 3 button clutch
- 5 speed
- stock flywheel
- stock drive shafts

BRAKES / SUSPENTION
- braid brake line kit
- slotted rotors all round
- front brake dust covers removed
- stock shocks
- new upper and lower ball joints
- JDM style spring/sleeve kit 4" raise/lower
- 17" rims 225/45/17 front 235/45/17 rear

OUTSIDE
- aftermaket front bar , cut and modded to fit intercooler
- accord side skirts
- vented bonnet
- bonnet struts installed
- x4 2 5/8 autometer bonnet gauges
- tinted tail lights and garnish
- body moulds colour coded
- 5000k h4 xenon headlight bulbs

INSIDE
- short shifter
- custom rollcage
- ADR approved monza 4-point harness's
- fire extinguisher
- LED down lights wired to key barrell dimmer
- autometer 2 5/8 oil pressure gauge
- autometer 5" monster tacho 10,000 rpm carbon fibre series
- autometer 2 5/8 boost gauge
- false boot floor
- everything else stock
- battery relocated to boot
- carbon vinyl trim thru out
- momo nero pedal kit

SOUND
- pioneer head unit
- mb quart splits (front)
- sony 6x9's (rear)
- jbl dual voice coil 15" sub (boot)
- clarion 300 wrms mono block amp (boot)
- 120 amp circuit breaker





__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.




GARAGE :
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

BUILD THREAD :
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
=
VIDEOS

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
phattzy is offline   Reply With Quote Quick reply to this message
Old 06-02-2015, 01:09 PM   #56
ty_93
Getting Comfortable
 
Join Date: Feb 2013
Posts: 86
ty_93 is on a distinguished road
[Car And Motor]
1997 Prelude Base
H22a


[Motor/Turbo Parts]
Stock block H22a - (10.6cr) ARP Head Studs / Honda HGasket
Pro series intake mani
70mm TB
Spoolin Performance Manifold
Turbonetics t3/to4e 60 trim .63Ar Turbine
Precision 39mm Wastegate
Mishimoto intercooler
Synapse Blow off valve

[Trans]
ACT 6 puck clutch and pressure plate
Duralast OEM flywheel
Duralast Gold CV Axles

[Fuel Management]
Walbro 255 pump
AEM fuel rail
Rc 750cc Injectors
E85
Hondata s300v3

[Boost]
9.7psi with Grimmspeed MBC

[No Tune, Street Tune, Dyno Tune]
Dyno Tune with Excessive Autosports in Sioux falls, SD
307whp and 270lbs at 9.7psi
ty_93 is offline   Reply With Quote Quick reply to this message
Old 06-15-2019, 09:09 AM   #57
mchef117
Newbie
 
Join Date: Jan 2016
Posts: 4
mchef117 is on a distinguished road
[Car And Motor]
2001 Prelude Type sh
H22a


[Motor/Turbo Parts]
93 h22a closed deck block with a 97 type s head fresh rebuild with arp head studs
70mm skunk2 alpha r TB
Greddy log style manifold
Garret gt30 with upgraded ball bearing kit
Tial 39mm Wastegate
JDM sports intercooler
HKS Blow off valve

[Trans]
Exedey extra pressure clutch
Fidanza Lightweight Aluminum Flywheel
Duralast Gold CV Axles

[Fuel Management]
Walbro 255 pump
AEM fuel rail
Rc 750cc Injectors
93
Hondata s300v2

[Boost]
Havent finished the turbo set up yet. Waiting on an obd2b to obd1 jumper and a aem wideband to finish
mchef117 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Prelude Forum : Honda Prelude Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
Type the last 3 characters on the Prelude license plate displayed at the top left of the page: FSV _ _ _
Insurance
Please select your insurance company (Optional)

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:26 PM.



Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002 - 2011, Preludepower.com
PreludePower Forums