Honda Prelude Forum : Honda Prelude Forums - View Single Post - 3rd Gen_ Black Majik Steering-H22 Swap....long story!
View Single Post
Old 01-14-2010, 11:22 PM   #14
ejd715
Lude Addict
 
Join Date: Feb 2007
Location: St Louis, MO
Posts: 730
ejd715 is on a distinguished road
Send a message via AIM to ejd715 Send a message via Yahoo to ejd715
So, i have a few questions about the rest of this process-alot of the write-ups do not have this information:


Alt belt-since i deleted the AC, what is the part number for the shorter belt that i need to use?

PS Belt-its going to be a tight fit in there but if i use an H23 belt, i think it will work-does anybody know the part number for the H23 belt? is anybody using something else?


PS hoses-again, i have to do some tinkering with them to see where they are going to go-anybody have a remedy for this? custom bracket?

Dizzy-what are you guys running? I have an external coil on the motor, but the harness is made for an internal. However, i have been told i can change this and run an MSD-type. true?



Fuel line-looks like i need to modify it a bit-what is everybody doing for this? just bending the B20 one?

Shifter cables-the bracket on the tranny doesnt work right with the cables-any suggestions? What is the work-around for this? I tried the H22 and H23 backets and they dont seem to work. Is this because im using an Accord shifter with 4g lude cables?


Radiator hoses-what are you guys using for the upper? I hear that the 5gen lower house works perfect?


I need some pointers
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Project Black Majik Steering
1988 4WS H22 Swap is running!!!
1989 4WS 27k miles all stock!!!
ejd715 is offline   Reply With Quote