Honda Prelude Forum : Honda Prelude Forums - Conversation Between jdk89-2.0si and MustardCat
Home Forums Albums Garage iTrader Arcade
Register FAQ Insurance Members List Calendar Mark Forums Read Auto Escrow Advertise is the premier Honda Prelude Forum on the internet. Registered Users do not see the above ads.
Conversation Between jdk89-2.0si and MustardCat
Showing Visitor Messages 1 to 8 of 8
  1. MustardCat
    07-11-2014 11:28 PM
    That would work. You could also just weld the bar directly to the end plates and make one solid piece.
  2. jdk89-2.0si
    07-11-2014 04:19 PM
    Ok I will do that, I'm sure he will be able to figure it out. As for the stut bar itself, im thinking of using 1in round bar and welding nuts in the ends. He has a few different pipe benders. Do you see any reason not to do it this way
  3. MustardCat
    07-08-2014 10:00 PM
    I would provide him with the drawings then. But they are just 3 evenly spaced holes around the large center hole.
  4. jdk89-2.0si
    07-08-2014 09:50 PM
    The only one I think I need is the spacing of the bolt holes, but if you know any other ones that would be helpful to me I would be very grateful? Having a company that is next door to my work cut the plates for STB's on a laser machine so whatever would help me explain to him what I need. most grateful
  5. MustardCat
    07-08-2014 08:26 PM
    Which measurements do you mean?
  6. jdk89-2.0si
    07-08-2014 03:29 PM
    Ok well it's working now thanks.
    On the stb bar autocad, how can I get the measurements. Just measure my shock tower bolts?
  7. MustardCat
    07-07-2014 01:39 PM
    Working for me right now, sometimes the host goes down for a little bit.
  8. jdk89-2.0si
    07-07-2014 12:05 PM
    Hey man, am I doing something wrong? Can't get your website to come up. Any ideas?

All times are GMT -6. The time now is 10:50 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002 - 2011,
PreludePower Forums