WTB: 3g front right lower control arm and knuckle

motoxxxman · 10-10-2009, 06:19 AM

as the title says, i need a front right (passenger side) lower control arm, and a front right knuckle for a 3g.

the lca cannot be bent, and it must have bushings, doesnt matter if they are stock or aftermarket, as long as it has them and can be used without additional parts. it can be from any 88-91 prelude.

the knuckle cannot be bent, and must have a wheel bearing and hub intact and useable, and would prefer to have a dust shield instact as well.
this means i dont want one that has a bearing that has play or makes noise.
doesnt matter if it is alb (abs) or non-alb, they both work
it HAS to be from a 90-91 Si or 2.0Si. 88-89 will not work!

post up with asking price shipped to me in West Hartland, CT 06091

Luderacer_91 · 10-10-2009, 04:07 PM

I have the knuckle in good condition, I will have to check on the lca to make sure of its condition.

I can do both for $85 including shipping and it can go out to you on Monday.

motoxxxman · 10-10-2009, 07:06 PM

Quote:

Originally Posted by Luderacer_91

I have the knuckle in good condition, I will have to check on the lca to make sure of its condition.

I can do both for $85 including shipping and it can go out to you on Monday.

awesome! let me know the condition of that lca first though

anyone else have either or both that can make a better offer?

Luderacer_91 · 10-10-2009, 08:26 PM

I will send you pics in he morning, Then you can let me know if you want them.

Later

Luderacer_91 · 10-11-2009, 09:06 PM

the lca was bent so here is a pic of the knuckle.

30 + shipping
let me know if you are still interested

motoxxxman · 10-12-2009, 11:23 PM

k, i have one other person making an offer as well in PM, just waiting to hear back from them with pics and a price. i'll post up or pm whoever i'd rather get them from

Luderacer_91 · 10-13-2009, 12:00 PM

Sounds good let me know

Thanks

motoxxxman · 10-14-2009, 09:18 PM

k, well i havent heard back from the other guy yet with a price, so i'll most likely be getting these from you. just gotta wait til i get my paycheck on friday.
what's your paypal addy? this way i can pm you friday evening or sometime saturday before i send the payment

Luderacer_91 · 10-14-2009, 10:32 PM

craig_lyle@hotmail.com is my paypal address...

Luderacer_91 · 10-19-2009, 10:06 AM

Do you still need the knuckle?
I've got it ready to go shipping to you is $15 UPS ground.

Hit me up if you are still intersted
Thanks

2nd one · 10-19-2009, 10:19 AM

Steve, you want to work out something in trade? i have the parts for both sides with new upper and lower balljoints and wheel bearings already pressed in. let me know. i am parting out the 90.

motoxxxman · 10-19-2009, 06:32 PM

i definitely still need these parts, i just need to wait another week to be able to pay for them.

as for a trade, that'd be awesome. what'd you guys have in mind for trades? i dont have a whole lot i'm willing to let go of haha, but i can always do stuff with ecu's

2nd one · 10-19-2009, 08:53 PM

i pm'd you but the parts are all under 1500 miles. i got another 3g with very little rust and was in a hurry to get it on the road, so the parts stayed on the 90. new upper and lower balljoints on both sides, and new hub bearings and wheel studs on both sides. the car was an s model, don't know if that makes a difference or not, so if you need the calipers and rotors you can have them too. i just need the ecu that we were discussing.

10-10-2009, 06:19 AM	#1
motoxxxman Boost Junkie Join Date: Mar 2005 Location: Northern CT Age: 27 Posts: 13,236 iTrader: (61) View Photos By: motoxxxman	WTB: 3g front right lower control arm and knuckle as the title says, i need a front right (passenger side) lower control arm, and a front right knuckle for a 3g. the lca cannot be bent, and it must have bushings, doesnt matter if they are stock or aftermarket, as long as it has them and can be used without additional parts. it can be from any 88-91 prelude. the knuckle cannot be bent, and must have a wheel bearing and hub intact and useable, and would prefer to have a dust shield instact as well. this means i dont want one that has a bearing that has play or makes noise. doesnt matter if it is alb (abs) or non-alb, they both work it HAS to be from a 90-91 Si or 2.0Si. 88-89 will not work! post up with asking price shipped to me in West Hartland, CT 06091 __________________ for sale: b20/b21/h23 pauter x-beam rods T To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. (click for link) Official dealer for Hondata and Boomslang To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 12.811 @109.54mph with a 1.947 60ft at only 9psi with a t3 and mostly stock internals To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-10-2009, 04:07 PM	#2
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	I have the knuckle in good condition, I will have to check on the lca to make sure of its condition. I can do both for $85 including shipping and it can go out to you on Monday. __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-10-2009, 08:26 PM	#4
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	I will send you pics in he morning, Then you can let me know if you want them. Later __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-11-2009, 09:06 PM	#5
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	pics as promised the lca was bent so here is a pic of the knuckle. 30 + shipping let me know if you are still interested __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-12-2009, 11:23 PM	#6
motoxxxman Boost Junkie Join Date: Mar 2005 Location: Northern CT Age: 27 Posts: 13,236 iTrader: (61) View Photos By: motoxxxman	k, i have one other person making an offer as well in PM, just waiting to hear back from them with pics and a price. i'll post up or pm whoever i'd rather get them from __________________ for sale: b20/b21/h23 pauter x-beam rods T To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. (click for link) Official dealer for Hondata and Boomslang To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 12.811 @109.54mph with a 1.947 60ft at only 9psi with a t3 and mostly stock internals To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-13-2009, 12:00 PM	#7
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	Sounds good let me know Thanks __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-14-2009, 09:18 PM	#8
motoxxxman Boost Junkie Join Date: Mar 2005 Location: Northern CT Age: 27 Posts: 13,236 iTrader: (61) View Photos By: motoxxxman	k, well i havent heard back from the other guy yet with a price, so i'll most likely be getting these from you. just gotta wait til i get my paycheck on friday. what's your paypal addy? this way i can pm you friday evening or sometime saturday before i send the payment __________________ for sale: b20/b21/h23 pauter x-beam rods T To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. (click for link) Official dealer for Hondata and Boomslang To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 12.811 @109.54mph with a 1.947 60ft at only 9psi with a t3 and mostly stock internals To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-14-2009, 10:32 PM	#9
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	craig_lyle@hotmail.com is my paypal address... __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-19-2009, 10:06 AM	#10
Luderacer_91 Newbie Join Date: Nov 2005 Location: Southeast, TN Age: 31 Posts: 67 iTrader: (4) View Photos By: Luderacer_91	Do you still need the knuckle? I've got it ready to go shipping to you is $15 UPS ground. Hit me up if you are still intersted Thanks __________________ THINGS I'M SELLING TO FUND MY BUILD 1. B21A1 MOTOR--- SOLD TO mstr_tech 2.TRANSMISSION---D2A4 3.16" MOTEGI RIMS FLAT BLACK 4.STEEL WHEELS 2 SETS 5.TRUNK LID 6.HOOD PM ME IF INTERESTED

10-19-2009, 10:19 AM	#11
2nd one Donating Member Join Date: Nov 2008 Location: virginia beach, va Age: 31 Posts: 1,836 iTrader: (6) View Photos By: 2nd one	Steve, you want to work out something in trade? i have the parts for both sides with new upper and lower balljoints and wheel bearings already pressed in. let me know. i am parting out the 90. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-19-2009, 06:32 PM	#12
motoxxxman Boost Junkie Join Date: Mar 2005 Location: Northern CT Age: 27 Posts: 13,236 iTrader: (61) View Photos By: motoxxxman	i definitely still need these parts, i just need to wait another week to be able to pay for them. as for a trade, that'd be awesome. what'd you guys have in mind for trades? i dont have a whole lot i'm willing to let go of haha, but i can always do stuff with ecu's __________________ for sale: b20/b21/h23 pauter x-beam rods T To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. (click for link) Official dealer for Hondata and Boomslang To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 12.811 @109.54mph with a 1.947 60ft at only 9psi with a t3 and mostly stock internals To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-19-2009, 08:53 PM	#13
2nd one Donating Member Join Date: Nov 2008 Location: virginia beach, va Age: 31 Posts: 1,836 iTrader: (6) View Photos By: 2nd one	i pm'd you but the parts are all under 1500 miles. i got another 3g with very little rust and was in a hurry to get it on the road, so the parts stayed on the 90. new upper and lower balljoints on both sides, and new hub bearings and wheel studs on both sides. the car was an s model, don't know if that makes a difference or not, so if you need the calipers and rotors you can have them too. i just need the ecu that we were discussing. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

PreludePower Forums