Its still sitting on the Pallet at my dads shop. Its the Blue Top. It is just the Longblock only. The damn thing is still tied town with metal straps from when it came from HMOTORSONLINE.com

It is located in New Hampshire, and ittl be pick up only. The motor has a 100% start up guarantee and whatever. I also have a JDM H22A intake manifold that i took apart and cleaned, comes with injectors and fuel rail. It does not have a TB, But you can use the H23A TB on the H22A IM. The H22A Intake manifold was to co-incide with making the h23a OBD1. All it needs now is an OBD1 Distributor but i think the one that is on it is.. P13 is marked all over the motor.

The block/Head and everything is mint, its clean enough to eat off of.

I dont have a pricetag really, so its a bid war. Ill have my dad take pics for me since im 3,200 miles from the motor.

http://i86.photobucket.com/albums/k117/yeedatoy/h23a.jpg

Here are some True FACTS about this motor, in case you are wondering:

http://inlinethumb45.webshots.com/43692/2300177970103330866S600x600Q85.jpg
http://inlinethumb23.webshots.com/41814/2783918780103330866S600x600Q85.jpg
^^ Intake, Header and Exhaust Setup

Accord Sir Wagon (http://www.honda-tech.com/showthread.php?t=2341343#) (CH9) (JDM)
197hp@6800/163tq@5300
notes: 10.6:1 CR, open deck likely regular JDM H22a head. 95mm stroke
55mm mains
No oil squirters
factory balancing holes on crank seems to be same as H23A1
PDE-3 rods that have a threaded in bolt into Rod with no nut
PDE head HF-1 (Same as Euro R/ Type S)
65.5mm Throttle Body tappers to 62mm on inside (Same as Euro R/ Type S)
Markings on Throttle Body read PCBX HF-1
PCB top part Timing Belt Plastic
P13 bottom part Timing Belt Plastic
P13/JDM H22A water pump
P13 Timing Belt part #
Hydralic Tensioner
Alternator (http://www.honda-tech.com/showthread.php?t=2341343&page=4#) ONLY crank pulley (Most like same part # as F20B, Euro R)
Cams from measuring seem to be USDM/JDM H22A cams
FRM cylinders
Pistons most likely is similar to the USDM H22A piston but with H23 like valve reliefs
Intake manifold looks more so like a smaller stock Accord one then a H22A
Obviously has secondaries like a USDM/JDM/Type S manifold
Euro R/Type S style injectors and possibly angle

EVERYTHING H22 IS BOLT ON WITH THIS MOTOR!!! (Header, Intake Manifold, Everything)
This motor comes with the H23A IM and H22A IM, both sets of injectors.


$1,700 Pickup Only

bidding ehh? that could get effy should post what your looking to get

I am looking to get 1800+

then just say your selling the engine for 1800. Am I wrong for assuming that theres no bidding in the for sale.

post on ebay if u want bids.

sweet engine none the less. 8)

Well 1800 minimum, i wont complain if someone wants it more and will give more.

We don't do bidding on this forum. Rules say post a price.
Ill give you 1500.
Posted via Mobile

I'll give you $1501

Starting Price is 1800, Minimum raise is 100.

i'll trump Fav's bid and bid $1400 since we can only use $100 incrimints.

i'll trump Fav's bid and bid $1400 since we can only use $100 incrimints.

he bid 1500.....

damn too bad I sold my lude a month ago

H23A ITR??????

damn too bad I sold my lude a month ago

H23A ITR??????


ITR? Haha. Im sure with the proper mounts.. its just like any other H series.

I will give you a $1000 for the engine shipped.

I will give you a $1000 for the engine shipped.


Nah, dnt wanna be ripped off.

he bid 1500.....


That was the joke :plain: I bid lower on purpose.

Rofl.
I knew this was gonna happen.
I still can't believe you even bought it...

Rofl.
I knew this was gonna happen.
I still can't believe you even bought it...

Haha, well i honestly diddnt think my h23a1 would survive .. and it did.

pics of the engine?

im still waiting on pics from my brother

I can't do 1800 especially driving 5.5hrs easily. If you have it in the fall I could do 1600 maybe. I don't want the h22 intake mani. I'd just buy roskos euro man setup
Posted via Mobile

Ill consider that frank.

Yeah. Don't hesitate to sell it though. I'm kinda up in this air with a simple all motor deal or a low boost super 60 setup like you had. Well see.
Posted via Mobile

Wouldnt be a bad choice to go that rout. But yeah, This is a rare motor so.. Def. worth all the money!

How far could you rev these thing either way? 6500rpm? Or 7500rpm?

You can rev it just like an H22.

Nice. If only it had the tranny. I want that tranny so bad!

Nice. If only it had the tranny. I want that tranny so bad!

What Tranny?

An h22 makes more power and you can get one for 800-1000 dollars. And you need a firm price no bids

I start at 800+shipping
Posted via Mobile

An h22 makes more power and you can get one for 800-1000 dollars. And you need a firm price no bids

I start at 800+shipping
Posted via Mobile

True dat. Rare motor though.

What Tranny?

My bad I was thinking of the Euro R H22A.

An h22 makes more power and you can get one for 800-1000 dollars. And you need a firm price no bids

I start at 800+shipping
Posted via Mobile

Not True. Go take a look at some Dyno Charts, H23A makes MORE power with basic bolt ons (200+whp)

Plus i have a set price now.

Edit* info on first post

lol you bought this from hmotors for $1400 and now youre trying to sell it for $1800. You post that you want at least $1800 and expect to get more than $1800?

lol you bought this from hmotors for $1400 and now youre trying to sell it for $1800. You post that you want at least $1800 and expect to get more than $1800?

Bought it from Hmotors for 1500+ shipping. And yeah, i expect to get that much. Its called a turnaround. I got a deal for this engine because they sold an H22 that i had held for me.

Bought it from Hmotors for 1500+ shipping. And yeah, i expect to get that much. Its called a turnaround. I got a deal for this engine because they sold an H22 that i had held for me.
Well who would buy your motor for $1800+ shipping when they can purchase one from hmotors, same place you got yours, for $1400+ shipping. Trying to flip this motor for a profit when you should be happy with breaking even is a dirt bag move.

Well who would buy your motor for $1800+ shipping when they can purchase one from hmotors, same place you got yours, for $1400+ shipping. Trying to flip this motor for a profit when you should be happy with breaking even is a dirt bag move.

Haha.. Just looked at the site and they DID in fact lower the price. This is news to me. However, its 1400 + 350 shipping.

Mine includes an intake manifold and injectors that you pretty much need. Its not to be shipped... Pick up only. I guess ill update the price to 1700.... Still getting a better deal with me anyways. Dirtbag move? I think not.

Whoops. Already posted.

Oh thats true. It is $1400 from Hmotors.

http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30030

Yeah just saw that, was more at the time of purchase. But the begining of my OP said pickup only. So anyways, updated, Sorry about that. Gotta compete with competition! lol. 1700 is as low as ill go with this engine. Sorry. Not going to ship it out.

Too bad my stock motor has 33k on it, else if it would be dying soon I'd definitely consider this since you live (or did atleast) a stones throw from here. :D

Nice motor anyway. Good luck with it.

My H22 made 211whp with just bolt ons... dyno proven

My H22 made 211whp with just bolt ons... dyno proven


Okay? Good for you. Id take an H23A over an H22A any day.

$1 dollar bob,

If you are pretty damn far and are willing to pick her up, ill drop the price down to 1500 for the engine and intake manifold.

How much without the intake mani I just would want the motor since I'd go with a rosko euro r mani.
Posted via Mobile

We don't do bidding on this forum. Rules say post a price.
Ill give you 1500.
Posted via Mobile

I'll give you $1501

If you are pretty damn far and are willing to pick her up, ill drop the price down to 1500 for the engine and intake manifold.

You already had 2 people offer you 1500 for that motor.

IMO too much for that motor, but whatever. 1800 is crazy

How much without the intake mani I just would want the motor since I'd go with a rosko euro r mani.
Posted via Mobile

1500 fo yu

Not to bust your balls here or anything, but at $1800 aren't you making a bit of a profit? lol

Not to bust your balls here or anything, but at $1800 aren't you making a bit of a profit? lol

not to bust YOUR balls lol, but you should take a look at the updated prices :)

lol I did...

http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30030

Does yours come with the ECU? If so you should probably say so, that's an extra 200 bones lol.

lol I did...

http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30030

Does yours come with the ECU? If so you should probably say so, that's an extra 200 bones lol.

Nope. You got to remember, This is PICKUP only, otherwise you sorta would be getting ripped off. Hmotors is 1400 + shipping which is 350.

350 depending where you live in the us. I know for us NE people shipping is like double everyone else for a motor.

I'm gonna have to pass on this. I don't feel like driving up there and hmotors only has a 30 or 60 day startup warranty thàt you've already exceeded. I think I'm gonna go boost or just h22a.
Posted via Mobile

350 depending where you live in the us. I know for us NE people shipping is like double everyone else for a motor.

I'm gonna have to pass on this. I don't feel like driving up there and hmotors only has a 30 or 60 day startup warranty thàt you've already exceeded. I think I'm gonna go boost or just h22a.
Posted via Mobile

So what.. you think now that it hasnt been started it wont start? they gaurentee the motor. i wouldnt be worried.

This thread = el ohh el

pfft. Why wouldn't anyone pay an extra $50 when they would lose the warranty and have to drive forever to pick it up having to use a truck with bad gas mileage from you?

I would buy the Hmotors one for $1750 shipped to my door or a shop of my choice...

free bump,
travis id honestly keep it if you can and find a 4th or 5th gen shell and put this motor in it as a project car to have. it looks like no-one is giving you serious offers on here.

Yeah, they think cos i have had it for longer than 30 days than its not going to run.. for 1500 and an extra intake manifold thats a fucking steal for this engine.

we dont know that it runs... neither do you. 1500 bucks is alot of money on top of driving 6hrs to pick up a motor i dont know runs. gl with the sale.

wow a bit pricey... gl on the sale

bumb for bad sales man.yelling at the customers

Haha. Its whatever. Figured id offer it to you all first. 1500 for this engine and an intake manifold is a smoking deal. People need to stop being such tightwads and support this sale so i can finish my damn car!

neon always yells at us. he needs to sell this more than any of us need to buy it.

$1299 lol

Keep the mani though, I'm already amassing a stock pile...

neon always yells at us. he needs to sell this more than any of us need to buy it.

IM NOT YELLING! BUY THIS NOW!

$1299 lol

Keep the mani though, I'm already amassing a stock pile...

Yes i will sell for 1300 without the intake manifold.

Yes i will sell for 1300 without the intake manifold.

lol...shipped?

I already said this engine is not going to be shipped.

Sale Pending

I already said this engine is not going to be shipped.

That's kinda hypocritical considering it WAS shipped to you originally.

And you call yourself a MOD

pft

:lol:

omfg. lmfao.

$1300....
:)

I was wondering if you would take any trades, which I think you wouldn't specially since you' don't want to ship, but If I had the money, I'd buy it right away, I love that engine.

where in newhampshire is this thing bro? im right in Dover, NH might be interested in this beast...

I was wondering if you would take any trades, which I think you wouldn't specially since you' don't want to ship, but If I had the money, I'd buy it right away, I love that engine.

depends on the trade.. lol

where in newhampshire is this thing bro? im right in Dover, NH might be interested in this beast...

Plaistow

Are you willing to part out 1 rod and 3 pistons? Ohh and one used wrist pin :)

Lol no! Personally, 1300 is aa damn great price for this motor. H22 Longblocks are 1200 + shipping... soo yeah.

you have to take into consideration everyone is broke these days. so if you wanna sell it for the price youd like, youre going to have to wait. i decided im not gonna sell my volks since no one can offer me a realistic price.

im not sure i understand how people can be broke unless they've lost their job. even then they can claim unemployement and milk that for a year. i manage to keep 3 jobs and im starting my turbo build in a month or so.

Trade for H22 ported and polished head, crower stage 2 cams and valve train,
Balanced and micropolished H23 crank, H23 block, balanced H23 Probe Industries rods, H22 type s pistons. It's basically an H23vtec as well but the rings didn't seat right due to some dumbass I hired to assemble the engine and make me use the stock P14. I think I got an oil and coolant leak now (not from the head gasket) it's two different problems so I will probably part out to buy something like yours unmolested.

Sorry, id rather not have another headache.

bump

Bump, damn it's tempting!!

Hahaha. YES! i know it is!

Still for sale! come on!

Bumpedy Bump

bump, I can't believe you still haven't sold it, if I had the cash, or if I part out my engine, but you're too far anyways.

it hasnt been bought because im supposed to buy it.

^^^^ to the toppp

Neon, I will fucking buy this shit. In july lol. I promise. You're not even home from wa and I wanna meet you when I pick it up lol.
Posted via Mobile

Bump for fav being all talk ;)

Alright. You'll see. When will you be home. Ill probably buy it that week or the week after.
Posted via Mobile

Sale is now pending.

Yeahhhh its mineeee! Back off.
Posted via Mobile

I want it. We can probably strike up a deal if you are willing to ship it???
You know im interested....

I want it. We can probably strike up a deal if you are willing to ship it???
You know im interested....

Haha, FaV wants it super badly. If he falls through, ill let you know. Never shipped an engine before so id have no idea how to do it.

I can contact my shipping companies. But it sounds like he is dead set on getting it.

I can contact my shipping companies. But it sounds like he is dead set on getting it.

i do have brand new turbo camshafts, and a precision turboooo ;)

Yes I'm very dead set on picking this up the week neon gets back to nh. Ill throw down money if need be.
Posted via Mobile

gfggggg

Bump..

Didn't you sell this motor a while back?

I was suppose to buy it but im going through some financial issues right now.

1200 takes it.

1200+ shipping if u want it that bad.

What exactly needs to be changed other than the upper part of the IM to do the swap, I got two dizzys so that's covered too. My car is obd1 93 si

What exactly needs to be changed other than the upper part of the IM to do the swap, I got two dizzys so that's covered too. My car is obd1 93 si

thats basically it man! lol.

oh come on. either take it or im taking the head off of it and using it.

engine so freshy clean ^_^

I know it's low but all I can offer is 1100 shipped.

hey mite pick this up cuz its cheap and i need a motor...my parents helpin me get a motor and this is perfect

where are you located. when are you interested in getting this.

where are you located. when are you interested in getting this.

im in hartford,ct and im not sure when but my parents bought it...they were rly wow'd wit the motor having 40k and thats when they gave me the ok :mrgreen: but idk when imma pick up the motor but def gonna get it pm me ur number so we can set something up

1200 takes it.

1200+ shipping if u want it that bad.

and ill take it for that price...dude im rly gonna buy this motor...i mapquested the general location of the motor and its about a 2hr 15min drive from where im at...but dude seriously pm me ur number so we can arrange for pick up

Ill hit him up on facebook for you man. Idk why he isn't answering.
Posted via Mobile

Ill hit him up on facebook for you man. Idk why he isn't answering.
Posted via Mobile

thnx man cuz my parents loanin me the money so i got cash in hand...i dont see what the problem is here...i want that motor lol

Sorry man, been real busy. 6038199871 is my number. the location is 39 westville road, plaistow NH. 03865.

the sooner you get this the better!

bump. come on man if you want this shit get at me!

Sold.. again.. haha. :)